KBP005M THRU KBP10M SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current:1.5A Features KBPM Glass passivated chip junction High case dielectric strength High surge current capability Ideal for printed circuit board Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: As marked on body Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol KBP 005M KBP 01M KBP 02M KBP 04M KBP 06M KBP 08M KBP 10M units 200 400 600 800 1000 V * Maximum repetitive peak reverse voltage Vrrm 50 100 * Maximum RMS voltage Vrms 35 70 140 280 420 560 700 V * Maximum DC blocking voltage Vdc 50 100 200 400 600 800 1000 V * * Maximum average forward rectified output current Ta = 40℃ Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) 1.5 A Ifsm 50 A Vf 1.0 1.3 V I2t 10 A2Sec Ta = 25°C Ta = 125°C Ir 5.0 500 µA (Note 1) Rth(ja) Rth(jl) 40 13 ℃/W Typical junction capacitance per leg at 4.0V,1MHz Cj 15 pF Operating junction and storage temperature range Tj, Tstg -55 to +150 ℃ Maximum instantaneous forward voltage drop per leg at 1.0A at 1.57A Rating for fusing (t < 8.3ms) Maximum DC reverse current at rated DC blocking voltage per leg Typical Thermal Resistance * If(av) Note: 1. Thermal resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. with 0.47″×0.47″(12×12mm)copper pads * HEDEC registered values Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES KBP005M THRU KBP10M Rev.A2 www.gulfsemi.com