WWW.PHIHONG.COM 65 Watt* Open-Frame Power Supply PSA065M Single Output 2 x 4” Medical Series Features • 2 x 4” Footprint • Low-Cost Applications • Medical Equipment • Touch Screen Displays Designed to Meet • • Low Profile Design Fits 1U Applications Low Leakage Current • Gaming • cUL / UL 60601-1 • CE (Low Voltage Directive) Mechanical Characteristics • Length: 101.6mm (4.0in) • Width: 50.8mm (2.0in) Output Specifications • IEC 60601-1 Model PSA065-120M PSA065-240M PSA065-480M DC Output Voltage +12V +24V +48V Min. 0A 0A 0A • • Load Convection 3.75A 1.88A 0.94A Height: 28.1mm (1.11in) Weight: 180g (6.35oz) 20cfm 5.42A 2.71A 1.36A Ripple (1) P-P (max.) 120mV 240mV 480mV Regulation Line Load ±2% ±2% ±2% ±2% ±2% ±2% (1) Measured by-pass capacitors 0.1uF / 100uF at output connector terminal and oscilloscope set at 20 Mhz. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. PSA065M Characteristics INPUT: WWW.PHIHONG.COM Over-voltage Protection AC Input Voltage Rating By zener clamp, auto-restart 100 to 240VAC Over-current Protection AC Input Voltage Range Auto-restart 90 to 264VAC ENVIRONMENTAL: AC Input Frequency Temperature 47 to 63Hz Operation Non-operation 0°C to +50°C -25°C to +85°C Input Current 1.5A @ 115VAC 0.75A @ 230VAC Humidity Operation Non-Operation 5% to 95% non-condensing 5% to 95% non-condensing Leakage Current 100uA maximum at 264VAC, 60Hz Emissions Inrush Current (cold) FCC Class B Conducted EN55022 Class B Conducted EN60601-1-2: 2001 Conducted 30A maximum for 115VAC at full load 60A maximum for 230VAC at full load (Cold start @ ambient 25°C) OUTPUT: Reliability MTBF 250,000 hours minimum at 25°C, with full load, with 20cfm forced air, at 120VAC/60Hz Efficiency 80% minimum at maximum load, 115VAC/60Hz Input Mating Connector Molex 09-52-4034 housing with Molex 08-50-0106 pins Hold-up Time >10mS at maximum load, 115VAC/60Hz Output Mating Connector Molex 26-03-4041 housing with Molex 08-50-0189 pins Dimension Diagram Unit: mm