WWW.PHIHONG.COM 50 Watt Universal Switching Adapter PSA60W Single Output Series Features • Compact • Power On LED • • Non-vented/Spill-proof Case Double Insulated Applications • Portable Equipment • Peripherals • • Notebook Computers Networking Safety Approvals • cUL/UL • CE • • TUV Meeting Cal. Prop. 65 Mechanical Characteristics • Length: 102mm (4.01in) • Width: 63.5mm (2.5in) • • Height: 32.5mm (1.28in) Weight: 400g (14oz.) Output Specifications Model PSA60W-120 PSA60W-150 PSA60W-180 PSA60W-240 DC Output Voltage +12V +15V +18V +24V Load Min. 0A 0A 0A 0A Max. 4.16A 3.33A 2.77A 2.10A Ripple (1) P-P (max.) 120mV 150mV 180mV 240mV Regulation Line & Load ±4% ±4% ±4% ±4% (1) Measured with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at 20 Mhz. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. PSA60W Characteristics INPUT: WWW.PHIHONG.COM AC Input Voltage Rating Over Current Protection 100 to 240VAC Output equipped with short circuit protection – auto restart AC Input Voltage Range 90 to 264VAC Short Circuit Protection Output can be shorted without damage AC Input Frequency 47 to 63Hz Thermal Protection 115°C internal Input Current 1.5A (rms) max. @ 115VAC 0.8A (rms) max. @ 230VAC Leakage Current ENVIRONMENTAL: Temperature Operation Non-operation 0 to +33°C -25 to +75°C 0.25mA max. Humidity Inrush Current (cold) Operation 55A for 120VAC at max. load 100A for 240VAC at max. load (Cold start @ ambient 25°C) Emissions OUTPUT: Efficiency 5 to 80% FCC Class B EN55022 Class B Dielectric Withstand (Hi-pot) Test 80% typical Primary to Secondary: 3000VAC for 1 minute, 10mA Hold-up Time DC Output Connector 10mS min. @ 120VAC and max. load 2.1x5.5mm Center Positive Standard Over Voltage Protection Mating Connector >130% over-voltage detection, adapter will be shut down Kycon KLD-0202-A or equivalent Dimension Diagram Unit: mm (inch)