WWW.PHIHONG.COM 45W World Wide – Two Wire Universal Input PSS45W Single Output Adapter Series Features • Compact Low Profile Case • Power On LED • • Non-vented/Spill-proof Case Double Insulated Applications • Portable Equipment • Peripherals • • Notebook Computers Networking Safety Approvals • cUL/UL • CE • TUV Mechanical Characteristics • Length: 104.6mm (4.12in) • Width: 60.7mm (2.39in) • • Height: 28.5mm (1.12in) Weight: 185g (6.53oz.) Output Specifications Model PSS45W-090 PSS45W-120 PSS45W-150 PSS45W-180 PSS45W-240 DC Output Voltage +9V +12V +15V +18V +24V Load Min. 0A 0A 0A 0A 0A Max. 5A 4A 3.4A 2.8A 2.1A Ripple (1) P-P (max.) 90mV 120mV 150mV 180mV 240mV Regulation Line & Load ±5% ±5% ±5% ±5% ±5% (1) Measured with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at 20 Mhz. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. PSS45W Characteristics INPUT: WWW.PHIHONG.COM Over Voltage Protection AC Input Voltage Rating Built-in Zener diode Clamping 100 to 240VAC ENVIRONMENTAL: AC Input Voltage Range Temperature 90 to 264VAC Operation (with no derating) 0 to +40°C AC Input Frequency 47 to 63Hz Humidity Operation 5 to 80% Leakage Current Max. 0.25mA (254VAC) Emissions Input Current FCC Class B EN55022 Class B 1A (rms) typical @ 115VAC 0.5A (rms) typical @ 230VAC Dielectric Withstand (Hi-pot) Test Input to output: 3000VAC for 1 minute, 10mA Inrush Current (cold) 15A max. (120VAC) 30A max. (240VAC) Power On Indicator OUTPUT: DC Output Connector Efficiency Green LED 2.1x5.5mm Center Positive Standard 85% typical Mating Connector Hold-up Time 8mS min. @ 115VAC typcial Over Current Protection >120%, Auto Restart Dimension Diagram Unit: mm (inch) Kycon KLD-0202-A or equivalent