PHIHONG PSA24A-120

WWW.PHIHONG.COM
24 WATT - TWO WIRE UNIVERSAL INPUT
PSA24A-120(P) Adapter Meets EISA and CEC Requirements
preliminary
Features
• Class B EMI
• No Load Power Consumption < 0.3 Watt
• Energy Star EPS Version 2.0 Compliant
•
•
•
Class II Double Insulated
EISA and CEC Compliant
Short-Circuit Protection
Applications
• Portable Equipment
• Peripherals
•
Access Devices
Safety Approvals
• cUL/UL
• PSE
•
BSMI
Mechanical Characteristics
• Length: 83.5mm (3.29in)
• Width: 35.0mm (1.38in)
•
•
Height: 73.5mm (2.89in)
Weight: 165g (5.82oz)
Output Specifications
Model
DC Output
Voltage
PSA24A-120(P)
12V
Load
Min.
Max.
0A
2.0A
Ripple (1)
P-P (max)
Regulation
Line Load
150mV
±5%
Efficiency
Level
Note: (1) Measured after 30 minutes with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at
20 Mhz.
Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit
www.phihong.com for the most up-to-date specifications.
PSA24A-120(P) Characteristics
INPUT:
WWW.PHIHONG.COM
AC Input Voltage Rating
Over Voltage Protection
100 to 240VAC
Output voltage shall not exceed 20V
AC Input Voltage Range
Short Circuit Protection
90 to 264VAC
Input Current
Output can be shorted without damage
0.6A(RMS) max. @ 100VAC, max. load
ENVIRONMENTAL:
Leakage Current
Operation
Non-operation
0.25mA max.
Inrush Current (cold)
< 85A for 230VAC at max. load
(Cold start @ ambient 25°C)
Input Power Saving
0.3W maximum at no load
OUTPUT:
Temperature
0 to +40°C
-40 to +85°C
Humidity (Relative)
Operation and Storage
20 to 90%
Emissions
FCC Class B
CISPR 22 Class B
Dielectric Withstand (Hi-pot) Test
Primary to Secondary: 3000VAC for 10mA 1min.
Efficiency
> 82% average efficiency
DC Output Connector
2.1x5.5mm Center Positive Standard
Hold-up Time
8mS min. @ 120VAC and max. load
Mating Connector
Kycon KLD-0202-A or equivalent
Over Current Protection
5.0A max @ 230VAC
Dimension Diagram Unit: mm (inch)