Model 6442 13mm Tip Reach, SMD Micro Grabber Test Clip FEATURES: Use with PQFP, SOIC, TSOP & SSOP packages with 0.3 lead pitch or greater. 13mm long tip allows measurement at IC leads that are not easily accessible. Maximum frequency is 100 MHz. MATERIALS: Leads: Stainless-Steel Wire Tip Tubing: Teflon™ Coated Nickel Plated Copper Body: ABS Flying Lead Connection: Gold Plated Copper RATINGS: Operating Voltage: Hands free usage in controlled voltage environments: 70 Vrms maximum. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc. ORDERING INFORMATION: Model 6442 (Kit contains ten test clips and ten flying leads) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected]) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094869 Page 1 of 2 Model 6442 13mm Tip Reach, SMD Micro Grabber Test Clip All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected]) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094869 Page 2 of 2