Model 6106 DMM RF Detector Test Probe Materials Scope Probe Probe Tip: Body – Brass, Gold Plated Insulation: Thermoplastic Cable: RG 174/U Banana Plug: Body – Brass, Nickel Plated Insulation: Thermoplastic, Black and Red Specifications Model Number Model 6106 DMM RF Detector Test Probe Features • • • • • Display RF voltages on multimeters Based on the use of high reliability SMD components Narrow-body monolithic probe will measure AC voltages of sinusoidal wave shapes between 500Hz and 1GHz Works best on multimeters with 10MΩ input impedance Conversion factor is 1 VDC for an input of 1 VRMS of the sine wave signal Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com USA: Bandwidth Peak AC Input DC Isolation Incl. Peak AC Turn-On Voltage 6106 1MHz to 1GHz ± 1.5dB 30V Input Capacitance Cable Length 100V 350mV 6pF 4ft (1.2m) Ordering Information Model: 6106 DMM RF Detector Test Probe All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2008 D1094453 Rev. 100 Page 1of 1