Models 72906 Mini SMD Grabber Test Clips Mini SMD Grabber Test Clips Features • • • • • • Designed for easy attachment to SMD chips with pitches down to 0.032” (0.80 mm) Insulated shaft can be bent up to 36 degrees for versatile attachment in awkward locations or close proximity to other clips Rotating jaws increase versatility in connection and stacking. Thin (3mm) profile allows close placement to adjacent clips. Compatible with leads with Ø0.8 mm female connectors Order Pomona model number 72905-0 for clip lead for SMD Mini Grabber - 0.8mm female/4 mm female for easy attachment to standard test leads. Materials • • Insulation: Polyamide Jaws: Steel Ordering Information Model: 72906-Color Available colors: Black (-0), Red (-2) USA: Sales: 800-490-2361 Technical Support: 800-2412060 Fax: 888-403-3360 Europe: 31-(0) 40 2675 150 International: 425-446-5500 e-mail: [email protected] Where to Buy: www.pomonaelectronics.com Specifications Max Current Admissible 1A Voltage; Max - Tension 33 V AC / 70 V DC Temperature -20˚ C + 80˚ C Max Resistance Less than 15 mΩ Rating: hands free testing in controlled environment: 70Vrms max. For CE compliance: Not intended for handheld use at voltages above 33Vrms/70Vdc All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2004 1/20/06 72906 Rev A Page 1 of 1 Page 1 of