POWERSEM PSW1C14008

ECO-PACTM 1
Single Phase
AC Controller Modules
PSW1C140
PSW1H140
IRMS
VRRM
= 130 A
= 600-1600 V
Preliminary Data Sheet
VRSM
VDSM
(V)
700
900
1300
1500
1700
VRRM
VDRM
(V)
600
800
1200
1400
1600
Type
PSW1C
PSW1C
PSW1C
PSW1C
PSW1C
140/06
140/08
140/12
140/14
140/16
PSW1H
PSW1H
PSW1H
PSW1H
PSW1H
140/06
140/08
140/12
140/14
140/16
Symbol
Test Conditions
IRMS
ITRMS
ITAVM
ITSM
TC = 85 °C; 50-400 Hz (per single controller)
∫ i2 dt
(di/dt)cr
TC = 85 °C;
Maximum Ratings
180° sine, per Thyristor
130
A
90
A
58
A
TVJ = 45 °C
t = 10 ms (50 Hz), sine
1150
A
VR = 0
t = 8.3 ms (60 Hz), sine
1230
A
TVJ = 125 °C t = 10 ms (50 Hz), sine
1000
A
VR = 0
t = 8.3 ms (60 Hz), sine
1070
A
TVJ = 45 °C
t = 10 ms (50 Hz), sine
6600
A²s
VR = 0
t = 8.3 ms (60 Hz), sine
6280
A²s
TVJ = 125 °C t = 10 ms (50 Hz), sine
5000
A²s
VR = 0
4750
A²s
150
A/µs
500
A/µs
1000
V/µs
t = 8.3 ms (60 Hz), sine
TVJ = 125 °C repetitive, IT = 60 A
f=50Hz, tP=200µs
VD=2/3VDRM
IG=0.45 A
non repetitive, IT = ITAVM
diG/dt=0.45A/µs
(dv/dt)cr
TVJ = 125 °C VD=2/3VDRM
PGAVM
VRGM
TVJ
TVJM
Tstg
VISOL
TVJ = 125 °C tP=30µs
≤
10
W
IT =ITAVM
≤
5
W
0.5
W
10
V
-40... + 150
150
°C
°C
-40... + 125
°C
2500
V∼
tP=300µs
50/60 Hz, RMS t = 1 min
IISOL ≤ 1 mA
3000
V∼
1.5 - 1.8
14 - 16
16
Nm
lb.in.
g
t=1s
Md
Mounting torque (M4)
Weight
typ.
•
•
•
•
•
•
Thyristor controller for AC (circuit
W1C acc. to IEC) for mains frequency
Isolation voltage 3000 V∼
Planar glass passivated chips
Low forward voltage drop
Leads suitable for PC board
soldering
UL registered, E 148688
Applications
•
•
•
•
Switching and control of single and three
phase AC circuits
Light and temperature control
Softstart AC motor controller
Solid state switches
Advantages
RGK= ∞, method 1 (linear voltage rise)
PGM
Features
•
•
•
•
•
Easy to mount with two screws
Space and weight savings
Improved temperature and power
cycling capability
High power density
Small and light weight
Data according to IEC 60747 refer to a single thyristor unless otherwise stated
 2005 POWERSEM reserves the right to change limits, test conditions and dimensions
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
ECO-PACTM 1
Symbol
Test Conditions
Characteristic Value
ID,IR
VT
VTO
rT
VGT
TVJ = 125°C, VR = VRRM, VD=VDRM
≤
IT = 200 A,
≤ 1.75
V
0.85
V
5.2
mΩ
TVJ = 25 °C
For power-loss calculations only
VD=6V
5
mA
TVJ= 25°C
≤
1.5
V
TVJ=-40°C
≤
1.6
V
IGT
VD=6V
TVJ= 25°C
≤
100
mA
TVJ=-40°C
≤
200
mA
VGD
IGD
IL
TVJ= 125°C
VD=2/3VDRM
≤
0.2
V
TVJ= 125°C
VD=2/3VDRM
≤
10
mA
≤
450
mA
TVJ= 25°C, VD=6V, RGK= ∞
≤
200
mA
TVJ= 25°C, VD=1/2VDRM
≤
2
µs
0.7
0.35
0.8
K/W
K/W
K/W
TVJ= 25°C, tP=10µs
IG=0.45A, diG/dt=0.45A/µs
IH
tgd
IG=0.45A, diG/dt=0.45A/µs
RthJC
RthJK
ds
dA
a
per thyristor; DC
per module
per thyristor; sine 180° el
typ.
per module
typ.
Creeping distance on surface
Creeping distance in air
Max. allowable acceleration
0.4
K/W
11.2
17.0
50
mm
mm
m/s²
Package style and outline
Dimensions in mm (1mm = 0.0394“)
W1C
W1H
 2005 POWERSEM reserves the right to change limits, test conditions and dimensions
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20