ECO-PACTM 2 Thyristor Module PSET 132/08-18 ITAVM VRRM = 132 A = 600-1800V Preliminary Data Sheet VRSM VDSM (V) 900 1300 1500 1700 1900 VRRM VDRM (V) 800 1200 1400 1600 1800 Type ACE-1 PSET 132/08 PSET 132/12 PSET 132/14 PSET 132/16 PSET 132/18 E-3 K-12 SVX-18 Symbol Test Conditions ITAVM ITSM TC = 85 °C, 180° sine 132 A TVJ = 45 °C t = 10 ms (50 Hz), sine 3600 A VR = 0 t = 8.3 ms (60 Hz), sine 3850 A TVJ = 125 °C t = 10 ms (50 Hz), sine 3200 A VR = 0 t = 8.3 ms (60 Hz), sine 3420 A TVJ = 45 °C t = 10 ms (50 Hz), sine 64800 VR = 0 ∫ i2 dt (di/dt)cr Maximum Ratings A²s t = 8.3 ms (60 Hz), sine 62300 A²s TVJ = 125 °C t = 10 ms (50 Hz), sine 51200 A²s VR = 0 49100 A²s 150 A/µs t = 8.3 ms (60 Hz), sine TVJ = 125 °C repetitive, IT = 250 A f=50Hz, tP=200µs VD=2/3VDRM IG=0.5 A non repetitive,IT = ITAVM 500 TVJ = 125 °C VD=2/3VDRM 1000 V/µs TVJ = 125 °C tP= 30µs ≤ 10 W IT =ITAVM ≤ 5 W PGAVM VRGM TVJ TVJM Tstg VISOL 0.5 W tP=300µs 10 -40... + 130 150 for 10 sec V -40... + 125 °C 3000 V∼ IISOL ≤ 1 mA 3600 Md Mounting torque Weight typ. (M4) • UL registered, E 148688 Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications • • • • DC motor control Light and temperature control Softstart AC motor controller Solid state switches 1.5 - 2.0 14 - 18 24 • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight °C °C 50/60 Hz, RMS t = 1 min t=1s Isolation voltage 3600 V∼ Advantages RGK= ∞, method 1 (linear voltage rise) PGM • • • • A/µs diG/dt=0.5A/µs (dv/dt)cr Features V∼ Nm lb.in. g Data according to IEC 60747 refer to a single thyristor unless otherwise stated. 2003 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 PSET 132 Symbol Test Conditions ID,I R VT VTO rT VGT TVJ = 125°C, VR = VRRM, VD=VDRM ≤ IT = 200 A, ≤ VD=6V TVJ= 25°C TVJ=-40°C ≤ 1.6 V IGT VD=6V TVJ= 25°C ≤ 300 mA TVJ=-40°C ≤ 400 mA TVJ= 125°C VD=2/3VDRM ≤ 0.2 V TVJ= 125°C VD=2/3VDRM ≤ 10 mA ≤ 450 mA TVJ= 25°C, VD=6V, RGK= ∞ ≤ 200 mA TVJ= 25°C, VD=1/2VDRM ≤ 2 µs VGD IGD IL Characteristic Value TVJ = 25 °C For power-loss calculations only TVJ= 25°C, tP=10µs ≤ 10 mA 1.3 V 0.8 V 1.65 mΩ 1.5 V IG=0.5A, diG/dt=0.5A/µs IH tgd IG=0.5A, diG/dt=0.5A/µs RthJC RthJK ds dA a per thyristor; DC, max. per module, max. per thyristor; sine 180° el, typ. 0.25 0.125 0.35 K/W K/W K/W per module, typ. 0.175 K/W Creeping distance on surface Creeping distance in air Max. allowable acceleration 11.2 5.0 50 mm mm m/s² Package style and outline Dimensions in mm (1mm = 0.0394“) 2003 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20