Three Phase AC Controller Modules PSUH 60 IRMS VRRM = 3 x 60 A = 400-1600 V Preliminary Data Sheet VRSM VDSM 500 900 1300 1500 *1700 VRRM VDRM 400 800 1200 1400 *1600 Type PSUH 60/04 PSUH 60/08 PSUH 60/12 PSUH 60/14 PSUH 60/16 * Delivery on request Symbol Test Conditions IRMS ITRMS ITAVM ITSM TC = 85 °C, 50-400 Hz (per phase) TVJ = TVJM TC = 85 °C 180° sine ∫ i2 dt (di/dt)cr (dv/dt)cr PGM PGAVM VRGM TVJ TVJM Tstg VISOL Md Weight Maximum Ratings 60 43 27 A A A Features • Thyristor controller for AC (circuit • • • • W3C acc. to IEC) for mains frequency Isolation voltage 3000 V∼ Planar glasspassivated chips Package with metal base plate UL registered E 148688 TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 550 600 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 500 550 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1520 1520 A2 s A2 s Applications • Switching and control of three TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1250 1250 A2 s A2 s TVJ = TJVM repetitive, IT = 25 A f = 50Hz, tP = 200µs VD = 2/3 VDRM 150 A/µs • Light and temperature control • Softstart AC motor controller • Solid state switches IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/µs 500 A/µs 1000 V/µs TVJ = TVJM VDR = 2/3 VDRM RGK = ∞, method 1 (linear voltage rise) TVJ = TVJM IT = ITAVM 50/60 HZ, RMS IISOL ≤ 1 mA tP = 30µs tP = 300µs t = 1 min t=1s Mounting torque typ. POWERSEM GmbH, Walpersdorfer Str. 53 91126 D- Schwabach Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20 (M5) phase AC circuits Advantages • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling capability • High power density 10 5 0.5 W W W 10 -40 ... + 125 125 -40 ... + 125 V °C °C °C 2500 3000 V∼ V∼ 2-2.5 100 Nm g Package, stil and outline Dimensions in mm (1mm = 0.0394“) 2003 POWERSEM reserves the right to change limits, test conditions and dimensions PSUH 60 Symbol Test Conditions ID, IR VT VTO rT VGT TVJ = TVJM, VR = VRRM, VD = VDRM ≤ IT = 45A, TVJ = 25°C ≤ For power-loss calculations only (TVJ = TVJM) 5 1.45 0.85 11 mA V V mΩ VD = 6V TVJ = 25°C TVJ = -40°C ≤ ≤ 1.5 1.6 V V IGT VD = 6V TVJ = 25°C TVJ = -40°C ≤ ≤ 100 200 mA mA VGD IGD IL TVJ = TVJM TVJ = TVJM VD = 2/3 VDRM VD = 2/3 VDRM ≤ ≤ 0.2 5 V mA TVJ = 25°C, tP = 10µs IG = 0.45A, diG/dt = 0.45A/µs ≤ 450 mA IH tgd TVJ = 25°C, VD = 6V, RGK = ∞ TVJ = 25°C, VD = ½ VDRM IG = 0.45A, diG/dt = 0.45A/µs ≤ ≤ 200 2 mA tq TVJ = TVJM, IT = 20A, tP = 200µs, VR = 100V -di/dt = 10A/µs, dv/dt = 15V/µs, VD = 2/3 VDRM typ. 150 µs RthJC per thyristor; sine 180°el per module 0.9 0.15 K/W K/W RthJK per thyristor; sine 180° el per module 1.1 0.18 K/W K/W dS dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration 16.1 6 50 mm mm m/s2 POWERSEM GmbH, Walpersdorfer Str. 53 91126 D- Schwabach Phone: 09122 - 9764-0 Fax.: 09122 - 9764-20 Characteristic Value µs 2003 POWERSEM reserves the right to change limits, test conditions and dimensions