ECO-PACTM 2 Single Phase AC Controller Modules PSW1C205 PSW1H205 IRMS VRRM = 230 A = 600-1600 V Preliminary Data Sheet VRSM VDSM (V) 700 900 1300 1500 1700 VRRM VDRM (V) 600 800 1200 1400 1600 Type PSW1C PSW1C PSW1C PSW1C PSW1C VX-18 205/06 205/08 205/12 205/14 205/16 PSW1H PSW1H PSW1H PSW1H PSW1H 205/06 205/08 205/12 205/14 205/16 VX-18 K-10 L-9 AC-1 L-9 Symbol Test Conditions IRMS ITRMS ITAVM ITSM TC = 85 °C; 50-400 Hz (per single controller) 230 A 180 A 105 A ∫ i2 dt (di/dt)cr TC = 85 °C; Maximum Ratings 180° sine TVJ = 45 °C t = 10 ms (50 Hz), sine 2250 A VR = 0 t = 8.3 ms (60 Hz), sine 2400 A TVJ = 125 °C t = 10 ms (50 Hz), sine 2000 A VR = 0 t = 8.3 ms (60 Hz), sine 2150 A TVJ = 45 °C t = 10 ms (50 Hz), sine 25300 A²s VR = 0 t = 8.3 ms (60 Hz), sine 23900 A²s TVJ = 125 °C t = 10 ms (50 Hz), sine 20000 A²s VR = 0 19100 A²s 150 A/µs 500 A/µs 1000 V/µs t = 8.3 ms (60 Hz), sine TVJ = 125 °C repetitive, IT = 250 A f=50Hz, tP=200µs VD=2/3VDRM IG=0.45 A non repetitive,IT = ITAVM diG/dt=0.45A/µs (dv/dt)cr TVJ = 125 °C VD=2/3VDRM PGAVM VRGM TVJ TVJM Tstg VISOL TVJ = 125 °C tP=30µs ≤ 10 W IT =ITAVM ≤ 5 W tP=300µs 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA Md Mounting torque Weight typ. t=1s 0.5 W 10 V -40... + 125 125 °C °C -40... + 125 °C 3000 V∼ 3600 (M4) Features • • • • • • Thyristor controller for AC (circuit W1C acc. to IEC) for mains frequency Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL registered, E 148688 Applications • • • • Switching and control of single and three phase AC circuits Light and temperature control Softstart AC motor controller Solid state switches Advantages RGK= ∞, method 1 (linear voltage rise) PGM AC-1 1.5 - 2.0 14 - 18 24 • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight V∼ Nm lb.in. g Data according to IEC 60747 refer to a single thyristor unless otherwise stated 2006 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 2 Symbol Test Conditions ID,IR VT VTO rT VGT TVJ = 125°C, VR = VRRM, VD=VDRM ≤ 5 IT = 300 A, ≤ 1.5 V 0.8 V 2.4 mΩ VD=6V TVJ= 25°C 1.5 V TVJ=-40°C ≤ 1.6 V IGT VD=6V TVJ= 25°C ≤ 150 mA TVJ=-40°C ≤ 200 mA TVJ= 125°C VD=2/3VDRM ≤ 0.2 V TVJ= 125°C VD=2/3VDRM ≤ 10 mA ≤ 450 mA TVJ= 25°C, VD=6V, RGK= ∞ ≤ 200 mA TVJ= 25°C, VD=1/2VDRM ≤ 2 µs VGD IGD IL Characteristic Value TVJ = 25 °C For power-loss calculations only ≤ TVJ= 25°C, tP=10µs mA IG=0.45A, diG/dt=0.45A/µs IH tgd IG=0.45A, diG/dt=0.45A/µs RthJC RthJK ds dA a per thyristor; DC per module per thyristor; sine 180° el 0.26 0.13 0.46 K/W K/W K/W per module 0.23 K/W Creeping distance on surface Creeping distance in air Max. allowable acceleration 11.2 17.0 50 mm mm m/s² Package style and outline Dimensions in mm (1mm = 0.0394“) W1H W1C 1 2 3 10 11 12 1 2 3 10 11 12 4 5 6 13 14 15 4 5 6 13 14 15 7 8 9 16 17 18 7 8 9 16 17 18 2006 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20