PN1105 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 1. Configuration & Dimensions Series PN1105 Dimensions [mm] A(max.) 10.0 B 11.1±0.3 C 4.8±0.2 D 2.0±0.2 E 2.0±0.2 F 7.1±0.3 G(ref.) 7.6 H(ref.) 2.4 I(ref.) 2.4 2. Schematic Diagram 3. Materials a.- Core : Ferrite DR Core b.- Base : FR – 4 c.- Wire : Enamelled copper wire (class F) d.- Adhesive : Epoxy resin e.- Terminal : Cu / Ni / Au f.- Soldering : Sn97 / Cu3 solder wire g.- Remark : Lead content 200ppm max. include ferrite 4. General Specification a.- Temp. rise : 40ºC max. b.- Rated current : Base on temp. rise & ∆L/L0A = 10% max. c.- Storage temp. : -40ºC ~ +125ºC d.- Operating temp. : -40ºC ~ +105ºC e.- Resistance to solder heat : 260ºC. 10 secs 1 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PN1105 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 5. Electrical Characteristics PN1105 (10µH – 200µH) PN1105 – 100M 10.0±20% Test Freq. L (KHz) 1 PN1105 – 120M 12.0±20% 1 0.069 3.60 PN1105 – 150M 15.0±20% 1 0.075 3.20 PN1105 – 220M 22.0±20% 1 0.080 3.00 PN1105 – 270M 27.0±20% 1 0.095 2.80 PN1105 – 330K 33.0±10% 1 0.100 2.60 PN1105 – 390K 39.0±10% 1 0.140 2.40 PN1105 – 470K 47.0±10% 1 0.170 2.20 PN1105 – 560K 56.0±10% 1 0.200 2.00 PN1105 – 680K 68.0±10% 1 0.210 1.80 PN1105 – 820K 82.0±10% 1 0.300 1.60 PN1105 – 101K 100.0±10% 1 0.320 1.50 PN1105 – 151K 150.0±10% 1 0.500 1.20 PN1105 – 201K 200.0±10% 1 0.650 1.00 DWG No. Inductance (µH) RDC (Ω) max. 0.045 IDC (A) max. 4.00 [Inductance tested at 1V ] 6. Curve Inductance VS. DC Current Curve PN1105 2 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PN1105 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 7. Packaging Information P: 16mm Leader no component 200 mm min. 4mm Components Trailer no component 400 mm min. User direction of feed Style 13 – 24 Series PN1105 Dimensions [mm] A 330 B 21±0.8 C 13±0.5 D 24 G 26+0 Inner : Reel Q’TY(pcs) 800 G.W.(gw) 1,800 N 50-0 T 30.4 Outer : Carton Style 13 – 24 Q’TY(pcs) 3,200 G.W.(Kg) 9.5 Size(cm) 40 x 40 x 24 8. Labelling 3 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PN1105 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 9. Reliability Test Test item Specification More than 90% of the terminal electrode shall be covered with fresh solder Solderability Thermal shock test (Temp. cycle) Inductance shall not change more than ±20% Test condition Preheat : 150±25% for 60 seconds Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5ºC Flux : Rosin Dip time : 4±1 seconds Room temp. 15 minutes -25±2ºC 30 minutes Room temp. 15 minutes 85±2ºC 30 minutes Total : 50 cycles Humidity Resistance test High temp. Resistance test Temperature : 40±2ºC Humidity : 90 ~ 95% Applied current : Per specifications Time : 500 hours Temperature : 105±2ºC Applied current : Per specifications Time : 500 hours 10. Edition Control Edition 1st Date 31/08/06 Change description Update Specification Made by Pablo Pozo 4 SMD Power Inductors P R E M O All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation.