APT8030LVFR
27A 0.300Ω
800V
POWER MOS V ®
FREDFET
Power MOS V® is a new generation of high voltage N-Channel enhancement
mode power MOSFETs. This new technology minimizes the JFET effect,
increases packing density and reduces the on-resistance. Power MOS V®
also achieves faster switching speeds through optimized gate layout.
• Fast Recovery Body Diode
TO-264
• 100% Avalanche Tested
D
FREDFET
• Lower Leakage
• Popular TO-264 Package
G
• Faster Switching
S
MAXIMUM RATINGS
Symbol
VDSS
ID
All Ratings: TC = 25°C unless otherwise specified.
Parameter
APT8030LVFR
UNIT
800
Volts
Drain-Source Voltage
27
Continuous Drain Current @ TC = 25°C
1
Amps
IDM
Pulsed Drain Current
VGS
Gate-Source Voltage Continuous
±30
Gate-Source Voltage Transient
±40
Total Power Dissipation @ TC = 25°C
520
Watts
Linear Derating Factor
4.16
W/°C
VGSM
PD
TJ,TSTG
108
-55 to 150
Operating and Storage Junction Temperature Range
TL
Lead Temperature: 0.063" from Case for 10 Sec.
IAR
Avalanche Current
1
27
1
Repetitive Avalanche Energy
EAS
Single Pulse Avalanche Energy
°C
300
(Repetitive and Non-Repetitive)
EAR
Volts
Amps
50
4
mJ
2500
STATIC ELECTRICAL CHARACTERISTICS
BVDSS
ID(on)
RDS(on)
IDSS
IGSS
VGS(th)
Characteristic / Test Conditions
MIN
Drain-Source Breakdown Voltage (VGS = 0V, I D = 250µA)
800
Volts
27
Amps
On State Drain Current
2
(VDS > I D(on) x R DS(on) Max, VGS = 10V)
Drain-Source On-State Resistance
2
TYP
(VGS = 10V, 0.5 ID[Cont.])
MAX
0.300
Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V)
250
UNIT
Ohms
µA
Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125°C)
1000
Gate-Source Leakage Current (VGS = ±30V, VDS = 0V)
±100
nA
4
Volts
Gate Threshold Voltage (VDS = VGS, ID = 2.5mA)
2
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
USA
APT Website - http://www.advancedpower.com
405 S.W. Columbia Street
Bend, Oregon 97702-1035
Phone: (541) 382-8028
FAX: (541) 388-0364
F-33700 Merignac - France
Phone: (33) 5 57 92 15 15
FAX: (33) 5 56 47 97 61
EUROPE
Avenue J.F. Kennedy Bât B4 Parc Cadéra Nord
050-5592 Rev B
Symbol
DYNAMIC CHARACTERISTICS
Symbol
APT8030LVFR
Test Conditions
Characteristic
MIN
TYP
MAX
Ciss
Input Capacitance
VGS = 0V
6600
7900
Coss
Output Capacitance
VDS = 25V
645
900
Crss
Reverse Transfer Capacitance
f = 1 MHz
320
480
Qg
Total Gate Charge
VGS = 10V
340
510
Qgs
Gate-Source Charge
VDD = 0.5 VDSS
ID = ID [Cont.] @ 25°C
31
170
47
250
VGS = 15V
16
32
Qgd
3
Gate-Drain ("Miller") Charge
t d(on)
Turn-on Delay Time
tr
Rise Time
t d(off)
Turn-off Delay Time
tf
VDD = 0.5 VDSS
14
28
ID = ID [Cont.] @ 25°C
59
90
RG = 0.6Ω
8
16
TYP
MAX
Fall Time
UNIT
pF
nC
ns
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Characteristic / Test Conditions
Symbol
27
Continuous Source Current (Body Diode)
IS
ISM
Pulsed Source Current
1
VSD
Diode Forward Voltage
2
dv/
MIN
Peak Diode Recovery
dt
dv/
108
(Body Diode)
dt
(VGS = 0V, IS = -ID [Cont.])
5
UNIT
Amps
1.3
Volts
5
V/ns
t rr
Reverse Recovery Time
(IS = -ID [Cont.], di/dt = 100A/µs)
Tj = 25°C
300
Tj = 125°C
600
Q rr
Reverse Recovery Charge
(IS = -ID [Cont.], di/dt = 100A/µs)
Tj = 25°C
2.0
Tj = 125°C
6.7
IRRM
Peak Recovery Current
(IS = -ID [Cont.], di/dt = 100A/µs)
Tj = 25°C
13
Tj = 125°C
22
ns
µC
Amps
THERMAL CHARACTERISTICS
Symbol
Characteristic
MIN
RθJC
Junction to Case
RθJA
Junction to Ambient
TYP
MAX
0.24
40
1 Repetitive Rating: Pulse width limited by maximum junction
temperature.
2 Pulse Test: Pulse width < 380 µS, Duty Cycle < 2%
VR = 200V.
D=0.5
0.1
0.2
0.1
0.05
Note:
PDM
Z JC, THERMAL IMPEDANCE (°C/W)
θ
050-5592 Rev B
0.3
0.01
0.02
0.005
0.01
SINGLE PULSE
t1
t2
Duty Factor D = t1/t2
Peak TJ = PDM x ZθJC + TC
0.001
10-5
10-4
°C/W
3 See MIL-STD-750 Method 3471
4 Starting T = +25°C, L = 6.86mH, R = 25Ω, Peak I = 27A
j
G
L
5 I ≤ -I [Cont.], di/ = 100A/µs, V
S
D
DD ≤ VDSS, Tj ≤ 150°C, RG = 2.0Ω,
dt
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.05
UNIT
10-3
10-2
10-1
1.0
10
RECTANGULAR PULSE DURATION (SECONDS)
FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
APT8030LVFR
50
50
40
5V
30
20
4.5V
10
VGS=15V
ID, DRAIN CURRENT (AMPERES)
VGS=10V
40
VGS=5.5V, 6V & 7V
30
20
4.5V
10
4V
4V
0
0
ID, DRAIN CURRENT (AMPERES)
TJ = -55°C
TJ = +25°C
80
TJ = +125°C
VDS> ID (ON) x RDS (ON)MAX.
250µSEC. PULSE TEST
@ <0.5 % DUTY CYCLE
60
40
TJ = +125°C
20
TJ = +25°C
TJ = -55°C
0
0
2
4
6
8
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 4, TYPICAL TRANSFER CHARACTERISTICS
BVDSS, DRAIN-TO-SOURCE BREAKDOWN
VOLTAGE (NORMALIZED)
ID, DRAIN CURRENT (AMPERES)
30
25
20
15
10
5
0
0
4
8
12
16
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 3, TYPICAL OUTPUT CHARACTERISTICS
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
0
100
200
300
400
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 2, TYPICAL OUTPUT CHARACTERISTICS
100
50
75
100
125
150
TC, CASE TEMPERATURE (°C)
FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE
25
1.4
V
GS
NORMALIZED TO
= 10V @ 0.5 I [Cont.]
D
1.3
1.2
VGS=10V
1.1
VGS=20V
1.0
0.9
0
10
20
30
40
50
60
ID, DRAIN CURRENT (AMPERES)
FIGURE 5, RDS(ON) vs DRAIN CURRENT
1.15
1.10
1.05
1.00
0.95
0.90
-25
0
25 50 75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE
-50
1.2
2.5
I = 0.5 I [Cont.]
D
D
V
GS
= 10V
2.0
1.5
1.0
0.5
0.0
-50
-25
0
25 50
75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
FIGURE 8, ON-RESISTANCE vs. TEMPERATURE
VGS(TH), THRESHOLD VOLTAGE
(NORMALIZED)
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
(NORMALIZED)
5V
1.1
1.0
0.9
0.8
0.7
0.6
-50
-25
0
25 50 75 100 125 150
TC, CASE TEMPERATURE (°C)
FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE
050-5592 Rev B
ID, DRAIN CURRENT (AMPERES)
VGS=5.5V, 6V, 7V, 10V & 15V
APT8030LVFR
200
30,000
10µS
OPERATION HERE
LIMITED BY RDS (ON)
50
100µS
10,000
C, CAPACITANCE (pF)
ID, DRAIN CURRENT (AMPERES)
100
1mS
10
5
10mS
100mS
1
TC =+25°C
TJ =+150°C
SINGLE PULSE
.5
DC
IDR, REVERSE DRAIN CURRENT (AMPERES)
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
D
VDS=100V
VDS=250V
VDS=400V
12
8
4
0
500
.01
.1
1
10
50
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 11, TYPICAL CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE
I = I [Cont.]
16
Coss
1,000
100
1
5 10
50 100
800
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 10, MAXIMUM SAFE OPERATING AREA
D
5,000
Crss
.1
20
Ciss
0
100
200
300
400
500
600
Qg, TOTAL GATE CHARGE (nC)
FIGURE 12, GATE CHARGES vs GATE-TO-SOURCE VOLTAGE
200
100
TJ =+150°C
TJ =+25°C
50
10
5
1
0
0.4
0.8
1.2
1.6
2.0
VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS)
FIGURE 13, TYPICAL SOURCE-DRAIN DIODE FORWARD VOLTAGE
TO-264 Package Outline
4.60 (.181)
5.21 (.205)
1.80 (.071)
2.01 (.079)
19.51 (.768)
20.50 (.807)
3.10 (.122)
3.48 (.137)
Drain
5.79 (.228)
6.20 (.244)
25.48 (1.003)
26.49 (1.043)
2.29 (.090)
2.69 (.106)
2.29 (.090)
2.69 (.106)
19.81 (.780)
21.39 (.842)
Gate
Drain
Source
0.76 (.030)
1.30 (.051)
2.79 (.110)
3.18 (.125)
0.48 (.019)
0.84 (.033)
2.59 (.102)
3.00 (.118)
050-5592 Rev B
5.45 (.215) BSC
2-Plcs.
Dimensions in Millimeters and (Inches)
APT's devices are covered by one or more of the following U.S.patents: 4,895,810
5,256,583
5,045,903
4,748,103
5,089,434
5,283,202
5,182,234
5,231,474
5,019,522
5,434,095
5,262,336
5,528,058