PN1608 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 1. Configuration & Dimensions Series PN1608 Dimensions [mm] A(max.) 6.60 B(max.) 4.45 C(max.) 2.92 E(typ.) 3.05 F(typ.) 1.27 G(typ.) 4.32 H(ref.) 4.10 I(ref.) 1.60 J(ref.) 3.00 K(ref.) 7.00 2. Schematic Diagram 3. Materials a.- Core : Ferrite DR Core b.- Wire : Enamelled copper wire (class F) c.- Base : Ceramic d.- Terminal : MoMn / Ni / Au e.- Adhesive : Epoxy resin f.- Remark : Lead content 200ppm max. include ferrite 4. General Specification a.- Temp. rise : 15ºC typ. b.- Storage temp. : -40ºC ~ +125ºC c.- Operating temp. : -40ºC ~ +105ºC d.- DC Current base on temp. rise & ∆L/L0A = 10% typ. e.- Resistance to solder heat : 260ºC. 10 secs 1 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PN1608 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 5. Electrical Characteristics PN1608 (1µH – 1000µH) DWG No. PN1608 – 1R0M PN1608 – 1R5M PN1608 – 2R2M PN1608 – 3R3M PN1608 – 4R7M PN1608 – 6R8M PN1608 – 100M PN1608 – 150M PN1608 – 220M PN1608 – 330M PN1608 – 470M PN1608 – 680M PN1608 – 101M PN1608 – 151M PN1608 – 221M PN1608 – 331M PN1608 – 471M PN1608 – 331M PN1608 – 471M Inductance (µH) Test Freq. L (KHz) SRF (MHz) typ. RDC (Ω) max. Irms (A) Isat (A) 1.0±20% 1.5±20% 2.2±20% 3.3±20% 4.7±20% 6.8±20% 10.0±20% 15.0±20% 22.0±20% 33.0±20% 47.0±20% 68.0±20% 100.0±20% 150.0±20% 220.0±20% 330.0±20% 470.0±20% 680.0±20% 1000.0.0±20% 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 130 115 90 70 50 45 35 30 20 15 14 11 9 6 5.5 5 4 3 2 0.05 0.05 0.07 0.08 0.09 0.13 0.16 0.23 0.37 0.51 0.64 0.86 1.27 2.00 3.11 3.80 5.06 9.20 13.80 2.90 2.80 2.40 2.00 1.50 1.40 1.10 1.00 0.80 0.60 0.50 0.40 0.30 0.25 0.20 0.16 0.15 0.12 0.07 2.90 2.60 2.30 2.00 1.50 1.20 1.10 0.90 0.70 0.58 0.50 0.40 0.31 0.27 0.22 0.18 0.16 0.14 0.10 [Inductance tested at 0.1V] [Inductance drop = 10% typ. at rated Isat] [∆T = 15ºC rise typ. at Irms] [Electrical Specifications at 25ºC] 6. Curve Inductance VS. DC Current Curve PN1608 2 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PN1608 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 7. Packaging Information P: 8mm 4mm Leader no component 200 mm min. Components Trailer no component 400 mm min. User direction of feed Style 07 – 12 13 – 12 Series PN1608 PN1608 Dimensions [mm] A 178 330 B 21±0.8 21±0.8 C 13 13±0.5 D 12 12 G 14+0 14+0 Inner : Reel Q’TY(pcs) 600 2,500 G.W.(gw) 215 900 N 50-0 50-0 T 16.5 18.4 Outer : Carton Style 07 – 12 13 – 12 Q’TY(pcs) 24,000 20,000 G.W.(Kg) 9.4 8.0 Size(cm) 42 x 41 x 24 40 x 40 x 24 3 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation. PN1608 SMD Power Inductors Unshielded C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone +34 951 231 320 Fax +34 951 231 321 E-mail: [email protected] Web http://www.grupopremo.com 8. Labelling 9. Reliability Test Test item Specification More than 90% of the terminal electrode shall be covered with fresh solder Solderability Thermal shock test (Temp. cycle) Inductance shall not change more than ±20% Test condition Preheat : 150±25% for 60 seconds Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5ºC Flux : Rosin Dip time : 4±1 seconds Room temp. 15 minutes -25±2ºC 30 minutes Room temp. 15 minutes 85±2ºC 30 minutes Total : 50 cycles Humidity Resistance test High temp. Resistance test Temperature : 40±2ºC Humidity : 90 ~ 95% Applied current : Per specifications Time : 500 hours Temperature : 105±2ºC Applied current : Per specifications Time : 500 hours 10. Edition Control Edition 1st Date 31/08/06 Change description Update Specification Made by Pablo Pozo 4 SMD Power Inductors PREMO All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation.