05292 ESOT12LCC-1 LOW CAPACITANCE TVS ARRAY APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ CAN Bus ✔ Cellular Phones ✔ Audio/Video Inputs ✔ Personal Digital Assistant (PDA) ✔ E1/T1 & E3/T3 IEC COMPATIBILITY (EN61000-4) SOT-23-6 ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns F E AT U R E S ✔ ✔ ✔ ✔ ✔ ✔ ✔ ESD Protection > 25 kilovolts 250 Watts Peak Pulse Power per Line (tp=8/20µs) Protects Two (2) Bidirectional Lines Bidirectional Configuration Low Leakage Current < 1.0µA Low Capacitance: 3pF per Line RoHS Compliant MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SOT-23 Package ✔ Weight 8 milligrams (Approximate) ✔ Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code PIN CONFIGURATION 05292.R0 7/08 I/O 1 6 NC NC 2 5 NC NC 3 4 I/O 1 www.protekdevices.com ESOT12LCC-1 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 250 Watts Peak Pulse Current (tp = 8/20µs) IPP 9 A Operating Temperature TA -55 to 150 °C TSTG -55 to 150 °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER (See Notes 1 & 2) DEVICE MARKING CODE ESOT12LCC-1 12L @ 25°C Unless Otherwise Specified RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) V WM VOLTS @ 1mA V(BR) VOLTS @ IP = 1A VC VOLTS 12.0 13.3 19.0 MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE @8/20µs VC @ IPP @VWM ID µA @0V, 1 MHz C pF 29.0 @ 9.0A 1 3 Note 1: Test between pins 1 to 3 and 2 to 3 in both directions. Note 2: Per IEC 6100-4-2, ESD ±25kV. 1,000 250W 8/20µs Waveform 100 10 0.1 05292.R0 7/08 10 100 td - Pulse Duration - µs 1,000 10,000 2 tf 100 Peak Value IPP 80 e-t TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 60 40 td = t I /2 PP 20 0 1 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Power - Watts 10,000 FIGURE 1 PEAK PULSE POWER VS PULSE TIME 0 5 10 15 20 t - Time - µs 25 30 www.protekdevices.com ESOT12LCC-1 SOT-23-6 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE D SOT-23-6 E 6 5 4 1 2 PACKAGE DIMENSIONS 0° - 8° K 3 L J A B C D E F G J K L M M B A G C MOUNTING PAD TYPICAL 0.70 1.90 0.95 2.40 1.00 2.80 1.50 0.90 0.35 0.85 1.70 0.90 0.09 2.60 0.20 TYP 0.35 3.05 1.75 1.30 0.50 1.05 2.10 1.45 0.20 3.00 0.20 TYP 0.55 0.110 0.059 0.036 0.014 0.033 0.067 0.036 0.003 0.102 0.007 TYP 0.014 0.120 0.070 0.051 0.020 0.040 0.083 0.057 0.008 0.118 0.007 TYP 0.022 NOTES 4 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. DIM Millimeters Inches 1 2 3 4 5 INCHES MIN MAX MILLIMETERS MIN MAX DIM 0.028 0.074 0.037 0.094 0.039 TAPE & REEL/BULK ORDERING NOMENCLATURE 3 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e.ESOT12LCC-1-T7 3. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., ESOT12LCC-1-LF-T7. 2 1 5 Outline & Dimensions: Rev 2 - 10/05, 06013 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F P0 W P2 P 3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t P2 D tmax 0.25 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Pin 1 Indicated by Dot Top cover tape A0 F W K0 B0 P User Direction of Feed COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05292.R0 7/08 3 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com