05240 PLR0504F STEERING DIODE/TVS ARRAY COMBO APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Handheld & Portable Electronics ✔ Video/Graphics Card ✔ USB 2.0 Interface ✔ DVI Interface IEC COMPATIBILITY (EN61000-4) SC-70-6L ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns FEATURES ✔ ✔ ✔ ✔ ✔ ✔ 200 Watts Peak Pulse Power per Line (tp = 8/20µs) ESD Protection > 40 kilovolts Low Clamping Voltage Protects Four(4) Lines Ultra-Low Capacitance: 1.9pF Typical RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SC-70-6L Weight 7 milligrams (Approximate) Available in Lead-Free Nickel-Paladium-Gold Plating Solder Reflow Temperature: Nickel-Paladium-Gold (Ni/Pd/Au) Sn/Ag/Cu, 96/3.5/0.5: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Pin One Defined By DOT on Top of Package PIN CONFIGURATION 05240.R1 2/07 I/O 1 1 6 I/O 4 GND 2 5 REF I/O 2 3 4 I/O 3 1 www.protekdevices.com PLR0504F DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature Forward Surge Rating (1/20 seconds @ 25°C, IF = 10mA) SYMBOL VALUE UNITS PPP 200 Watts °C TL -55 to 150 TSTG -55 to 150 °C VF 1.5 Volts ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING PLR0504F A5 RATED STAND-OFF VOLTAGE (See Note 1) MINIMUM BREAKDOWN VOLTAGE (See Note 1) V WM VOLTS 5.0 @ 25°C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) (See Note 1) @ IP = 5A VC VOLTS MAXIMUM LEAKAGE CURRENT (See Note 1) MAXIMUM CAPACITANCE (See Note 1) @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) (See Note 1) @ IP = 1A VC VOLTS @ VWM ID µA @0V, 1 MHz CJ(SD) pF 6.0 15.0 25.0 3 1.9 Note 1: From I/O Pin to Ground. FIGURE 1 PEAK PULSE POWER VS PULSE TIME 120 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 10,000 1,000 200W, 8/20µs Waveform 100 10 0.01 05240.R1 2/07 FIGURE 2 PULSE WAVE FORM tf 100 Peak Value IPP 80 e-t TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 60 40 td = t I /2 PP 20 0 1 10 100 td - Pulse Duration - µs 1,000 10,000 2 0 5 10 15 20 t - Time - µs 25 30 www.protekdevices.com PLR0504F GRAPHS FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs % Of Rated Power 80 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE 5 Volts per Division 35 25 15 5 -5 ESD Test Pulse: 25 kilovolt, 1/30ns (waveshape) 05240.R1 2/07 3 www.protekdevices.com PLR0504F SC-70-6L PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE D SC70-6L E 6 5 4 1 2 PACKAGE DIMENSIONS 0° - 8° K 3 L J F A B C D E F G J K L M M B A G C MOUNTING PAD TYPICAL 0.50 1.30 0.65 1.72 0.60 1.11 2.33 4 0.020 0.051 0.026 0.068 0.024 0.044 0.092 1.90 1.15 0.80 0.15 0.65 BSC 1.30 BSC 0.80 0.08 2.00 0 0.26 2.15 1.35 1.00 0.30 1.10 0.25 2.20 0.10 0.46 0.074 0.045 0.031 0.006 0.0255 BSC 0.0512 BSC 0.031 0.003 0.078 0 0.010 0.084 0.055 0.040 0.012 0.043 0.010 0.086 0.004 0.018 NOTES 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. DIM Millimeters Inches 1 2 3 4 5 6 7 INCHES MIN MAX MILLIMETERS MIN MAX DIM TAPE & REEL ORDERING NOMENCLATURE 3 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T73 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PLR0504F-T73. 3. Suffix-P = Lead-Free Nickel-Paladium-Gold Plating, i.e., PLR0504F-P-T73. 2 1 5 6 7 Outline & Dimensions: Rev 4 - 4/06, 06019 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F P0 W P2 P 2.25 ± 0.10 2.34 ± 0.10 1.22 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t P2 D tmax 0.25 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Pin 1 Indicated by Dot Top cover tape A0 F W K0 B0 P User Direction of Feed COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05240.R1 2/07 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com