P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL318-14 Series 3mm LED Snap-in Holder Absolute Maximum Ratings at TA = 25°C Features *Snap-In Panel Mount Indicator *Mounting Hole 4 mm (.156”) *No mounting Hardware required *Housing Material Black Nylon UL94V-2 *1 Super Bright Red LED with Color Diffused Lens used *26AWG 6” (+) Red and (-) Black Wire Leads *RoHS Compliant Power Dissipation……………………………………………………………...…. 66mW Reverse Voltage (<100 µA).……...…...……..……………………………….………. 5.0V Max Forward Current…………..………….….…….……..……………………… 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)………………..…........… 100mA Operating Temperature Range……………..……………………..….…. -25°C to +85°C Storage Temperature Range……………..……………….....…….….... -40°C to +100°C Soldering Temperature (1.6 mm below body)………………….……...… 260°C for 5 seconds Electrical & Optical Characteristics at TA = 25°C Emitting Color Part Number Chip Material 6” Wire Leads PL31814-1R21-2 Deep Red AlGaAs Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm Deg Typ Max Typ Max 660 643 54° 1.8 2.2 50.0 90.0 Forward Voltage @20mA (V) Lumious Intensity @20mA (mcd) All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. 0.2+0.1 1.9±0.5 14.0 4.8 6.35 Wire Leads 3.0 Stripped and Tinned 152.4 ±10mm 1.0 4.4±0.5 02-16-07 Rev 0 RS