P-TEC PL318-1R24

P-tec Corp.
Tel:(800)688-0613
2405 Commerce Circle Tel:(719) 589 3122
Alamosa Co. 81101
Fax:(719) 589 3592
www.p-tec.net
[email protected]
PL318 Series 3mm LED Snap-in Holder
Absolute Maximum Ratings at TA = 25°C
Features
*Snap-In Panel Mount Indicator
*Mounting Hole 4 mm (.156”)
*No mounting Hardware required
*Housing Material Black Nylon UL94V-2
*1 Red LED with Color Diffused Lens used
*Standard Terminals
*RoHS Compliant
Power Dissipation……………………………………………………………...…. 90mW
Reverse Voltage (<100 µA).……...…...……..……………………………….………. 5.0V
Max Forward Current…………..………….….…….……..……………………… 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)………………..…........… 100mA
Operating Temperature Range……………..……………………..….…. -25°C to +85°C
Storage Temperature Range……………..……………….....…….….... -40°C to +100°C
Soldering Temperature (1.6 mm below body)………………….……...… 260°C for 5 seconds
Electrical & Optical Characteristics at TA = 25°C
Emitting
Color
Part Number
PL318-1R24
Chip
Material
Red
GaP
Peak
Wave
Length
Dominant
Wave
Length
Viewing
Angle
2θ ½
nm
nm
Deg
Typ
Max
Typ
Max
700
650
54°
2.1
3.0
1.5
3.0
Forward
Voltage
@20mA (V)
Lumious
Intensity
@20mA (mcd)
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified.
0.2+0.1
1.9±0.5
10.00
Cathode
4.8
3.0
3.9
Standard Leads
2.54
Anode
16.0 Min.
1.0
4.4±0.5
02-16-07 Rev 0 RS