P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL519M Series 5mm LED Snap-in Panel Mount Holder Features Absolute Maximum Ratings at TA = 25 °C *Snap-in Design Requires no Hardware *Mounting Hole 7.2 mm (0.287”) *Housing Material Black Nylon UL94V-2 *1 Three Leaded Bi-Color Hi-Eff Red/Green LED with White Diffused Lens used *Standard Terminals *Common Cathode *RoHS Compliant Power Dissipation……………………………………………………………….... 78mW Reverse Voltage (<100µA)….………………..……...…...…….………………….…. 5.0V Max Forward Current…….…………..………………….……..…………………. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)……........…………….….. 100mA Operating Temperature Range……………………………………….…. -25°C to +85°C Storage Temperature Range……………….....……………………….. –40°C to +100°C Soldering Temperature (1.6 mm below body)………....………………….... 260° for 5 seconds Electrical & Optical Characteristics at TA = 25 °C Emitting Color Part Number Orange-Red Green PL519M-1RG1213 Chip Material GaAsP GaP Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm 635 567 626 572 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) Deg Typ Max Min Typ 70° 2.1 2.6 14.0 14.0 35.0 34.0 All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. 1.3 9.2 7.2 0.2 Min 5.0 10.7 Anode Green Cathode Black Anode Red 2.54 Typ 2.54 Typ 4.4 ±0.5 3.8 ±0.5 02-15-07 Rev 0 RS