P-tec Corp. Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL520 Series 5mm LED Snap-in Panel Mount Holder Features Absolute Maximum Ratings at TA = 25 °C *Snap-in Design Requires no Hardware *Mounting Hole 6.35 mm (0.25”) *Housing Material Black Nylon UL94V-2 *1 Hi-Eff Red LED with Color Diffused Lens used *Standard Terminals *RoHS Compliant Power Dissipation……………………………………………………………….... 78mW Reverse Voltage (<100µA)….………………..……...…...…….………………….…. 5.0V Max Forward Current…….…………..………………….……..…………………. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)……........…………….….. 100mA Operating Temperature Range……………………………………….…. -25°C to +85°C Storage Temperature Range……………….....……………………….. –40°C to +100°C Soldering Temperature (1.6 mm below body)………....………………….... 260° for 5 seconds Electrical & Optical Characteristics at TA = 25 °C Emitting Color Part Number PL520-1R12 Chip Material Orange-Red GaAsP Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm 635 626 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) Deg Typ Max Min Typ 30° 2.1 2.6 19.0 39.0 All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. Locking Shims (Tapered) 0.8 4.8 13.2 3.9±0.5 6.4 3.8 6.10 Typ. 2.54 ±.01 10.4 Typ. 02-15-07 Rev 0 RS