OPTOELECTRONICS LED Displays Unit: mm 47.76 41.5 Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 3.5 min. 28.5 A AND-2307 Series B G 28.5 GaAsP/GaP–Red; GaP–Green 7 Segment, Large Size; 2.3 Inch 60.0 70.0 F 25.75 C E D DP No. 5 5.5ø 1 Features 5 12.0 • Large size—7 segment displays • Available in red or green • Suitable for large size displays for distance viewing; across-the-building status displays • Available in both common cathode and common anode • RoHS Compliant 0.5 1.0 All Pin No. 1 5 2.54 X 4 = 10.16 E D C B A F G DP Description Number of Digits Size Common Cathode Color Anode Display Face Number of Pins 2.3 inch 1 AND-2307SCL AND-2307SAL Red Red 10 2.3 inch 1 AND-2307GCL AND-2307GAL Green Gray 10 Absolute Maximum Ratings (T = 25°C) Characteristics Rating Unit IF(DC)/SEG Symbol 30 mA VR 3 (Red), 5 (Green) V Operating Temperature Range TOpr -25 to 85 °C Storage Temperature Range TStg -25 to 100 °C DC Forward Current/Segment Reverse Voltage/Segment Electro-Optical Characteristics (T = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Forward Voltage/Segment VF IF = 20 mA – 8.4 12.0 V Forward Voltage/D.P. VF IF = 10 mA – 4.2 6.0 V Reverse Current IR VR = 3 (Red), 5 (Green) – – 100 µA Red IV IF = 10 mA 4.7 7.8 – mcd Green IV IF = 10 mA 4.1 6.8 – mcd Red λP IF = 10 mA – 635 – nm Green λP IF = 10 mA – 567 – nm Red ∆λ IF = 10 mA – 40 – nm Green ∆λ IF = 10 mA – 30 – nm Luminous Intensity Per Segment Peak Emission Wavelength Spectral Line Half Width Unit Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07 AND-2307 Series GaAsP/GaP–Red; GaP–Green LED Displays Luminous Intensity vs. Forward Current 1.5 Luminous Intensity (mcd) Luminous Intensity vs. Temperature Red Relative Intensity Green 1.0 0.5 -40 -20 0 20 Temperature 40 60 Green 10 Red 1 80 1 40 30 +100°C 20 10 +25°C 0 6.0 (mA) Forward Current vs. Forward Voltage (GaP) 50 IF = Forward Current (mA) IF = Forward Excitation Current (mA) Forward Current vs. Forward Voltage (Red GaAsP) 50 2 3 10 20 30 Forward Current -5°C 40 30 +100°C +25°C -5°C 20 10 0 7.0 8.0 9.0 VF = Forward (V) 6.0 8.0 10.0 VF = Forward Voltage (V) 10.0 Max. Current (mA) Max Current vs. Temperature 30 20 10 0 20 40 60 80 Ambient Temperature 100 AND-5610 Series Pin Connection Table AND-2307SCL Pin 1 2 3 4 5 Connection Common Cathode Anode E Anode D Anode C Common Cathode Pin 6 7 8 9 10 AND-2307SAL Connection Anode B Anode A Anode dp Anode F Anode G Pin 1 2 3 4 5 Connection Common Anode Cathode E Cathode D Cathode C Common Anode Pin 6 7 8 9 10 Connection Cathode B Cathode A Cathode dp Cathode F Cathode G Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07