REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B DESCRIPTION DATE 06-01-06 RoHS Compliancy APPROVED DP ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC 1. PHYSICAL DIMENSIONS 2.65 1-2. CURRENT RATING A. @ 115 VAC..........................................6 A RMS MAX B. @ 250 VAC.........................................4 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.25 mA MAX B. @ 250 VAC 50Hz.............................0.45 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 1.15 1.063 ± 0.003 R0.04MAX. 2.6 ± 0.003 PANEL CUTOUT 0.57 FUSE HOLDER .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / / 15 16 25 30 42 45 40 DIF. MODE dB / / 6 6 30 48 40 40 40 0.43 2.17 2.38 FREQ. MHz 2.57TYP 1.06MAX. 1-7. OPERATING TEMPERATURE.................-25° TO +85° C 1-8. SAFETY: 1-9. RoHS COMPLIANT 2. ELECTRICAL SCHEMATIC L: C1: C2: R: NOTES: 1. MOUNTING PANEL THICKESS 0.04 TO 0.07 INCHES, 1.3mH 0.1uF 3300pF 2.2MΩ Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 862-06/003 EMI FILTER UNIT: in REV. B 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 01-16-03 01-16-03 JJH / 01-16-03