1A1 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION 1A7 SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * High reliability Low leakage Low forward voltage drop High current capability R-1 MECHANICAL DATA * * * * * Case: Molded plastic black body Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.19 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL 1A1 1A2 1A3 1A4 1A5 1A6 1A7 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 50 70 100 140 200 280 400 420 600 560 800 700 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 25 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note) Typical Thermal Resistance Operating and Storage Temperature Range VDC Volts IO 1.0 Amps I FSM 25 Amps CJ 15 R θJA 60 T J , T STG -65 to + 150 pF 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0A DC @T A = 25 o C Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 100 o C Maximum Full Load Reverse Current Full Cycle Average .375” (9.5mm) lead length at T L = 75oC NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts SYMBOL VF IR 1A1 1A2 1A3 1A4 1.1 5.0 50 100 1A5 1A6 1A7 UNITS Volts uAmps uAmps 1998-8 Back RECTRON