ALUMINUM ELECTROLYTIC CAPACITORS SG Series: Radial, Miniature, High Temperature Range, 105°C FEATURES •105°C, 1000 hours assured. • High temperature range, with 7mm height. SPECIFICATIONS Item Performance Operating Temperature Range -40° ~ + 105°C Capacitance Tolerance ± 20% (120Hz, 20°C) I = 0.01CV or 0.3 ( A) whichever is greater (after 2 minutes) Where, C = rated capacitance in F. V=rated DC working voltage in V. Leakage Current (at 20°C) Rated Voltage Dissipaton Factor Tan at 120 Hz, 20°C (max) Tan 4 6.3 10 16 25 35 50 63 0.35 0.25 0.20 0.17 0.15 0.13 0.10 0.10 Rated Voltage Low Temperature Characteristics (at 120Hz) Impedance Ratio Load Life Test Shelf Life Test 6.3 10 16 25 35 50 63 7 6 4 3 2 2 2 2 Z(-40°C) /Z(+20°C) 15 12 8 6 4 4 4 4 Test Time Capacitance Change 1000 Hrs Dissipation Factor Less than 200% of specifiec value Within specified values Test Time Capacitance Change 1000 Hrs Dissipation Factor Less than 200% of specifiec value Leakage Current Within specified values 120 500 1K 10K up Under 33 0.75 1.00 1.20 1.30 1.45 47 to 220 0.80 1.00 1.10 1.15 1.20 70 85 105 1.27 1.0 Temperature (°C) Under 50 Multipliers 1.95 Ripple Current & Temperature Mutipliers The specification shall be satisfied when the capacitors are restored to 20°C after exposing them for 1000 hrs at 105°C without voltage applied. ± 20% 60 (50) Cap. (mF) 1.65 Impedance ratio shall not exceed the values given in the table. The specification shall be satisfied when the capacitors are restored to 20°C after rated voltage applied for 1000hrs at 105°C. ± 20% Leakage Current Freq. (Hz) Ripple Current & Frequency Multipliers 4 Z(-25°C) /Z(+20°C) Satisfies Characteristic W of JIS C 5141 Standards DIMENSIONS & PERMISSABLE RIPPLE CURRENT Dimension: D×L(mm); Ripple Current: mA/RMS at 120Hz 105°C VDC mF Code 4V (0G) fD x L mA 6.3V (0J) fD x L mA 10V (1A) fD x L mA 16V (1C) fD x L mA 25V (1E) fD x L mA 35V (1V) fD x L mA 50V (1H) 63V (1J) fD x L mA fD x L mA 2 0.10 0R1 4x7 2 4x7 0.22 R22 4x7 3 4x7 3 0.33 R33 4x7 4 4x7 4.4 0.47 R47 4x7 5 4x7 7.9 1 010 4x7 10 4x7 11 2.2 2R2 4x7 15 4x7 17 3.3 3R3 4.7 4R7 10 100 4x7 22 220 33 330 4x7 32 4x7 18 4x7 21 4x7 22 4x7 22 4x7 5x7 22 23 5x7 26 25 4x7 26 4x7 5x7 26 30 5x7 6.3 x 7 31 34 6.3 x 7 40 33 39 4x7 5x7 34 41 6.3 x 7 47 6.3 x 7 53 8x7 70 8x7 76 4x7 32 4x7 5x7 32 4x7 35 5x7 43 6.3 x 7 53 6.3 x 7 8x7 60 71 6.3 x 7 5x7 49 59 6.3 x 7 65 8x7 83 8x7 85 6.3 x 7 125 4x7 31 4x7 47 470 4x7 38 4x7 5x7 39 47 100 101 5x7 61 6.3 x 7 5x7 75 63 6.3 x 7 80 6.3 x 7 90 220 221 6.3 x 7 90 6.3 x 7 99 8x7 140 8x7 146 330 331 8x7 156 8x7 156 LEAD SPACING AND DIAMETER fD 4 5 6.3 8 P 1.5 2.0 2.5 3.5 fd 0.45 PART NUMBER EXAMPLE SG 0R1 M 1H SA 040 070 0.5 a 1.0 b 0.5 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CE02 REV 2004.8.23