ALUMINUM ELECTROLYTIC CAPACITORS LP Series: Large Can Size, 3 Leaded FEATURES • 85°C, 2000 hours assured. • Has an auxiliary lead which can withstand vibration excellently when affixing to PCB. • Suitable for electronic equipment with medium-high voltage such as filter of high rectification circuits. SPECIFICATIONS Item Performance -40°C ~ +85°C Operating Temperature Capacitance Tolerance ± 20% (120Hz, 20°C) I = 0.02CV or 1.5 mA whichever is smaller (after 5 minutes) Leakage Current (at 20°C) Where, C = rated capacitance in W.V. F. V = rated DC working voltage in V 6.3 10 16 25 35 ~ 63 100 ~ 160 200 ~ 250 Cap. ( F) Dissipation Factor under 1000 - - - - 0.17 - 0.15 0.15 Tan 1500, 3300 - - - - 0.20 0.20 - 4700, 6800 - - 0.30 0.25 0.25 - - 10000, 15000 0.55 0.45 0.35 0.35 - - 22000 and up 0.60 0.55 - - at 120 Hz, 20°C - - Impedance ratio shall not exceed the values given in the table below Low Temperature Rated Voltage 6.3 ~ 100 160 ~ 250 Characteristics Impedance Z(-25°C) /Z(+20°C) 4 8 (at 120Hz) Ratio Z(-40°C) /Z(+20°C) 12 16 - Load Life Test at 20°C (after rated voltage Test Time 2000 Hrs Shelf Life Test at 20°C Test Time Capacitance Change < ± 20% (after exposing them for Capacitance Change Dissipation Factor Less than 200% of specified value. 1000 hours at 85°C Dissipation Factor Leakage Current Within specified value without voltage applied) applied for 2000 hours at 85°C) Freq. (Hz) Ripple Current & 60(50) 120 500 1K 10K up Under 100 0.95 1.00 1.10 1.30 1.33 160 and up 0.90 1.00 1.20 1.50 W.V.(V) Frequency Multipliers Standards 1000 Hrs 20% Less than 200% of specified value Leakage Current Within specified value Ripple Current & 40 50 70 85 Temperature Multipliers 2.1 1.8 1.50 1.00 1.55 Satisfies Characteristic W of JIS C 5141 DIMENSIONS AND PERMISSABLE RIPPLE CURRENT Dimension: D×L(mm) Ripple Current: A/RMS at 120Hz 85°C mF 150 220 330 470 560 680 820 1000 1500 2200 2700 3300 4700 6800 10000 15000 22000 27000 33000 VDC Code 151 221 331 471 561 681 821 102 152 222 272 332 472 682 103 153 223 273 333 6.3V(0J) DxL A 22 x 30 22 x 40 25 x 40 25 x 50 10V(1A) DxL A 1.7 2.2 2.9 3.4 22 22 25 25 30 x x x x x 30 40 40 50 50 1.7 2.2 2.9 3.4 4.4 16V(1C) DxL A 22 x 30 22 x 35 25 x 40 25 x 50 30 x 50 25V(1E) DxL A 22 x 30 1.5 22 x 40 2.0 25 x 40 2.6 30 x 50 3.4 4.1 LEAD SPACING AND DIAMETER D 22 25 F1 10 12.5 15 F2 5 6.25 7.5 d 1.0 1.0 1.0 d1 1.4 1.4 1.4 35V(1V) DxL A 22 x 30 1.4 22 x 40 1.7 25 x 40 2.5 30 x 50 3.2 50V(1H) DxL A 22 x 30 22 x 35 1.3 22 x 40 1.8 25 x 50 2.2 30 x 50 3.4 1.1 1.4 1.7 2.4 3.2 63V(1J) DxL A 22 x 35 25 x 40 25 x 40 25 x 40 30 x 50 30 x 60 100V (2A) DxL A 22 x 30 22 x 35 22 x 40 25 x 40 1.2 25 x 50 1.5 30 x 50 1.9 30 x 60 2.4 2.6 4.8 160V(2C) DxL A 22 x 30 22 x 35 25 x 40 0.7 25 x 40 0.9 25 x 50 1.0 1.2 1.4 2.0 2.9 0.7 0.8 0.9 1.0 1.1 200V(2D) DxL A 250V(2E) DxL A 22 x 30 0.5 22x 30 0.6 22 x 40 0.7 22x 40 0.8 25 x 40 0.8 25x 40 1.0 30 x 50 1.2 25 x 50 1.1 DIAGRAM 30 PART NUMBER EXAMPLE LP 103 M 1E BK 250 400 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C1CH01 REV 2009.8.3