ALUMINUM ELECTROLYTIC CAPACITORS RXF Series: 105 °C up to 10,000 hours RoHS ü FEATURES • • • • 105°C, 8,000 ~ 10,000 hours assured Suitable for switching power supplies, UPS, Ballast Smaller size with large permissible ripple current RoHS Compliant SPECIFICATIONS Items Rated Voltage Range Operating Temperature Range Capacitance Tolerance Performance 200 ~ 400V 450V -40°C ~ +105°C +20% (at 120Hz, 20°C) after 1 minute Time Leakage Current (at 20 °C) CV < 1000 Leakage Current CV > 1000 Low Temperature Characteristics (at 120Hz) Z (-25) / Z (+20°C) Impedance Ratio Capacitance Change Dissipation Factor Leakage Current Shelf Life Test 3 3 5 5 6 Within + 20% of initial value Less than 200% of specified value Less than 500% of specified value * The above specifications shall be satisfied when the capacitors are restored to 20°C after exposing them for 1,000 hrs at 105°C without voltage applied. The rated voltage shall be applied to the capacitors before the measurements (Refer to JIS C 5102). Freq. (Hz) 100k 120 1k 10k up ÖD (mm) Ripple Current & Frequency Multipliers 10 0.25 0.61 0.88 1.0 12.5 ~ 18 0.35 0.66 0.89 1.0 Other Standards JIS C 5101-4 DIMENSIONS P jd cv > 1000 Z (-40) / Z (+20°C) 6 6 6 6 8,000 hrs for ÖD = 10mm; 10,000 hrs for ÖD >12.5mm Test Time Within + 20% of initial value Capacitance Change Less than 200% of specified value Dissipation Factor Within specified value Leakage Current * The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage applied with rated ripple current for 8,000 hrs / 10,000 hrs at 105°C. Load Life Test 10 CV < 1000 I = 0.1CV + 40 (µA) I = 0.04CV + 100 (µA) I = 0.03CV + 15 (µA) I = 0.02cv + 25 (µA) Where C = rated capacitance in µF. V = rated DC working voltage in V. Rated Voltage 200 250 350 400 450 Tan (max) 0.20 0.20 0.24 0.24 0.24 Impedance ratio shall not exceed the values given in the table below. Rated Voltage 200 250 350 400 450 Dissipation Factor (Tan ä at 120Hz, 20 °C) jD after 5 minutes 12.5 5.0 0.6 Unit: mm 16 18 7.5 0.8 1.5 0.5 a b DIMENSIONS & PERMISSIBLE RIPPLE CURRENT V.DC Item 200V (2D) Ripple Current ÖD x L 33 47 68 100 150 220 330 Ripple Current: mA/rms at 105°C 350V (2V) Ripple Current ÖD x L 120Hz 100kHz µF 4.7 10 15 22 250V (2E) 400V (2G) Ripple Current ÖD x L 120Hz 100kHz 10 x 20 140 350 ÖD x L 120Hz 100kHz 10 x 20 200 500 12.5 x 20 200 500 12.5 x 20 260 650 12.5 x 20 260 650 12.5 x 25 320 800 16 x 20 360 900 12.5 x 20 390 975 12.5 16 16 18 16 18 18 470 490 630 615 840 1050 1430 1,175 1,225 1,420 1,385 1,890 2,365 3,220 12.5 16 16 18 16 18 18 18 390 405 520 505 680 655 860 1,130 975 1,015 1,300 1,265 1,530 1,480 1,935 2,545 16 18 16 18 18 430 420 560 550 700 1,075 1,045 1,400 1,375 1,575 x x x x x x x 25 20 25 20 31.5 31.5 40 x x x x x x x x 25 20 25 20 31.5 25 31.5 40 x x x x x 25 20 31.5 25 31.5 450V (2W) Ripple Current Ripple Current ÖD x L 120Hz 100kHz 10 12.5 12.5 16 16 18 16 18 16 18 18 x x x x x x x x x x x 20 20 25 20 25 20 31.5 25 35.5 31.5 35.5 140 220 260 270 360 450 470 455 575 585 765 350 550 650 680 900 1,125 1,175 1,135 1,445 1,465 1,720 RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] 120Hz 100kHz 20 20 25 25 20 31.5 25 31.5 90 180 240 290 280 390 380 480 240 450 600 725 705 975 950 1,200 18 x 31.5 630 1,575 10 12.5 12.5 16 18 16 18 18 x x x x x x x x C1CD05 2008.2.19