MMIC AP209 Product Features Applications • 50 ~ 3000MHz • GaAs MMIC • 43dBm Output IP3 • 13.7dB Gain • 24dBm P1 dB • Single +9V Supply • SOT-89 SMT Package • CDMA, W-CDMA Medium Power Amplifier • High Linearity Drive Amplifier Package Type: SOT-89 Description AP209 is a high linearity amplifier designed with GaAs MMIC in a low cost SOT-89 package. It is designed for applications such as GSM, CDMA, W-CDMA drive devices which require high IP3. Absolute Maximum Ratings PARAMETER UNIT Device Voltage VDC +12 RF Input Power(Continuous) dBm +10 Storage Temperature ℃ MIN MAX -40 +150 Operating Ranges PARAMETER UNIT MIN Operating Frequency MHz 50 Device Voltage VDC Case Temperature ℃ MAX 3000 +9 +10 -40 +85 (Ta=+25℃, VDD=+9V&+7V, Test Freq=900 MHz) Electrical Specifications PARAMETER TYP Units Min Typ Gain (S21) dB 12 13.7 13.3 Input Return Loss (S11) dB -21 -20 Output Return Loss (S22) dB -17 -17 Output 3rd Order Intercept Point (OIP3) dBm 44 42 Output 1dB compression Point (P1dB) dBm 24 23 Noise Figure dB 2.5 2.5 DC Operating Current mA Supply Voltage Vdc Thermal Resistance (Rth) ℃/W 39 90 120 Max 140 +9V Typ 117 +7V 40 OIP3 is measured with two tones, at an output power of +10dBm/tone separated by 1MHz. ▪ Tel : 82-31-250-5011 ▪ [email protected] ▪ All specifications may change without notice. Version 6.0 MMIC AP209 Application Circuit (900MHz, Vdc=+9V) Bill of Material Parameter C1 100 pF L1 3.9 nH C2 6.0 pF L2 18 nH C3 100 pF R1 0 Ω C4 0.1 uF OIP3 vs. Frequency 15 0 14 -5 13 -10 12 -15 11 -20 10 -25 840 880 920 960 50 OIP3(dBm) Magnitude (dB) S-Parameter vs. Frequency 800 Parameter 45 40 35 30 800 1000 840 3.5 25 3 24 2.5 2 1 20 Frequency(MHz) ▪ Tel : 82-31-250-5011 ▪ [email protected] 960 1000 22 21 920 1000 23 1.5 880 960 P1dB vs. Frequency P1dB(dBm) Noise Figure(dB) Noise Figure vs. Frequency 840 920 Frequency(MHz) Frequency(MHz) 800 880 960 1000 800 840 880 920 Frequency(MHz) ▪ All specifications may change without notice. Version 6.0 MMIC AP209 Application Circuit (1800MHz, Vdc=+9V) Bill of Material Parameter C1 2.0 pF L1 3.9 nH C2 6.0 pF L2 18 nH C3 100 pF L3 4.7 nH C4 0.1 uF R1 0 Ω OIP3 vs. Frequency 14 -5 55 13 -10 50 12 -15 11 -20 10 -25 30 9 -30 25 1740 1780 1820 1860 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 1700 Parameter 45 40 35 1700 1900 1740 4.5 26 4 25 3.5 3 2.5 20 ▪ Tel : 82-31-250-5011 ▪ [email protected] 1900 22 1.5 Frequency(MHz) 1860 23 21 1820 1900 24 2 1780 1860 P1dB vs. Frequency P1dB(dBm) Noise Figure(dB) Noise Figure vs. Frequency 1740 1820 Frequency(MHz) Frequency(MHz) 1700 1780 1860 1900 1700 1740 1780 1820 Frequency(MHz) ▪ All specifications may change without notice. Version 6.0 MMIC AP209 Application Circuit (900MHz, Vdc=+7V) Bill of Material Parameter C1 100 pF L1 3.9 nH C2 6.0 pF L2 18 nH C3 100 pF R1 0 Ω C4 0.1 uF OIP3 vs. Frequency 15 0 50 14 -5 45 13 -10 12 -15 11 -20 25 10 -25 20 840 880 920 960 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 800 Parameter 40 35 30 1000 800 840 Frequency(MHz) 920 960 1000 Frequency(MHz) Noise Figure vs. Frequency P1dB vs. Frequency 5 25 24 4 P1dB(dBm) Noise Figure(dB) 880 3 2 23 22 21 1 800 840 880 920 Frequency(MHz) ▪ Tel : 82-31-250-5011 ▪ [email protected] 960 1000 20 800 840 880 920 960 Frequency(MHz) ▪ All specifications may change without notice. Version 6.0 1000 MMIC AP209 Application Circuit (1800MHz, Vdc=+7V) Bill of Material Parameter C1 2.0 pF L1 3.9 nH C2 6.0 pF L2 18 nH C3 100 pF L3 4.7 nH C4 0.1 uF R1 0 Ω OIP3 vs. Frequency 14 -5 50 13 -10 45 12 -15 11 -20 10 -25 25 9 -30 20 1740 1780 1820 1860 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 1700 Parameter 40 35 30 1700 1900 1740 Noise Figure vs. Frequency 1860 1900 1860 1900 P1dB vs. Frequency 5 24 23 4 P1dB(dBm) Noise Figure(dB) 1820 Frequency(MHz) Frequency(MHz) 3 2 1 1700 1780 22 21 20 19 1740 1780 1820 Frequency(MHz) ▪ Tel : 82-31-250-5011 ▪ [email protected] 1860 1900 1700 1740 1780 1820 Frequency(MHz) ▪ All specifications may change without notice. Version 6.0 MMIC AP209 Application Circuit (2100MHz, Vdc=+9V) Bill of Material Parameter C1 1.2 pF L1,L3 3.9 nH C2 1.5 pF L2 18 nH C3 100 pF R1 0 Ω C4 0.1 uF OIP3 vs. Frequency 13 5 50 12 0 45 11 -5 10 -10 9 -15 30 -20 25 1900 1960 2020 2080 2140 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 8 Parameter 40 35 1900 2200 1960 Noise Figure vs. Frequency 2140 2200 2140 2200 P1dB vs. Frequency 25 5 24 4 P1dB(dBm) Noise Figure(dB) 2080 Frequency(MHz) Frequency(MHz) 3 2 23 22 21 1 1900 2020 20 1960 2020 2080 Frequency(MHz) ▪ Tel : 82-31-250-5011 ▪ [email protected] 2140 2200 1900 1960 2020 2080 Frequency(MHz) ▪ All specifications may change without notice. Version 6.0 MMIC AP209 Application Circuit (2300MHz, Vdc=+9V) Bill of Material Parameter C1 0.75 pF L1 3.9 nH C2 2.7 pF L2 18 nH C3 100 pF L3 2.7 nH C4 0.1 uF R1 0 Ω OIP3 vs. Frequency 13 0 50 12 -5 45 11 -10 10 -15 9 -20 30 8 -25 25 2240 2280 2320 2360 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 2200 Parameter 2400 40 35 2200 2240 Frequency(MHz) 2360 2400 2360 2400 P1dB vs. Frequency 25 5 24 4 P1dB(dBm) Noise Figure(dB) 2320 Frequency(MHz) Noise Figure vs. Frequency 3 2 23 22 21 1 2200 2280 20 2240 2280 2320 Frequency(MHz) ▪ Tel : 82-31-250-5011 ▪ [email protected] 2360 2400 2200 2240 2280 2320 Frequency(MHz) ▪ All specifications may change without notice. Version 6.0 MMIC AP209 Application Circuit (2600MHz, Vdc=+9V) Bill of Material Parameter C1 0.75 pF L1 2.7 nH C2 2.0 pF L2 18 nH C3 100 pF L3 1.8 nH C4 0.1 uF R1 0 Ω OIP3 vs. Frequency 13 0 50 12 -5 45 11 -10 10 -15 9 -20 30 -25 25 2500 2540 2580 2620 2660 OIP3(dBm) Magnitude(dB) S-Parameter vs. Frequency 8 Parameter 40 35 2500 2700 2540 Noise Figure vs. Frequency 2660 2700 2660 2700 P1dB vs. Frequency 25 5 24 4 P1dB(dBm) Noise Figure(dB) 2620 Frequency(MHz) Frequency(MHz) 3 2 23 22 21 1 2500 2580 20 2540 2580 2620 Frequency(MHz) ▪ Tel : 82-31-250-5011 ▪ [email protected] 2660 2700 2500 2540 2580 2620 Frequency(MHz) ▪ All specifications may change without notice. Version 6.0 MMIC AP209 Application Circuit (50~1000MHz, Vdc=+9V) Bill of Material Parameter Parameter C1 1 nF C2 1 nF 100 pF C4 100 nF 50 14 0 45 13 -10 12 -20 11 -30 30 -40 1000 25 200 400 600 800 OIP3(dBm) . Magnitude(dB) 10 50 Wirewround 2520Type R1 0 Ω 40 35 50 200 Frequency(MHz) 400 600 800 1000 Frequency(MHz) Noise Figure vs. Frequency P1dB vs. Frequency 5 25 4 24 p1dB(dBm) NF(dB) L2 OIP3 vs. Frequency 15 10 6.8 nH 1 uH C3 S-Parameter vs. Frequency L1 3 2 1 23 22 21 0 20 50 200 400 600 Frequency(MHz) ▪ Tel : 82-31-250-5011 ▪ [email protected] 800 1000 50 200 400 600 800 Frequency(MHz) ▪ All specifications may change without notice. Version 6.0 1000 MMIC AP209 Package Dimensions (Type: SOT-89) Pin No Function 1 Input 2 Ground 3 Output/Bias 4 Ground ! ESD sensitive Observe precautions for handling, testing and packaging. Recommended Pattern Recommended Mounting Configuration RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ [email protected] ▪ All specifications may change without notice. Version 6.0