5.0ns Delay 50 Ohm Impedance Single-in-Line Delay Module OPERATING SPECIFICATIONS ELECTRICAL SPECIFICATIONS @ 25OC Pulse Overshoot (Pos) .............................................. 5% to 10%, typical Pulse Distortion (S) ................................................................ 3% typical Attenuation ................................................................ 0.25 dB maximum Working Voltage ....................................................... 25 VDC maximum Dielectric Strength .................................................... 100VDC minimum Insulation Resistance ......................... 1,000 Megohms min. @ 100VDC Temperature Coefficient ........................................... 70 ppm/OC, typical Band Width (fC) ................................................................. .35/tr approx. Operating Temperature Range ...................................... -55O to +125OC Storage Temperature Range ...................................... -65O to +150OC Measured @ 50% Level on the Leading Edge Total Delay ................................................................. 5.0 ns ± 0.25 ns Rise Time (20%-80%) ........................................................ 1.8 ns max. Characteristic Impedance ...................................... 50.0 Ohms + 10% D.C. Resistance ......................................................... 0.8 Ohms max. Attenuation ...................................................................... 0.5 dB max. TEST CONDITIONS (Measurements made at 25OC) Input Rise Time .................................................................... 2.0 ns max. Input Pulse Period ..................................................................... 1000 ns Input Pulse Width .................................................................... 2000 ns SCHEMATIC DIAGRAM ENVIRONMENTAL 1 2 3 COM IN OUT All units are designed to meet the applicable portions of MIL-D-23859, MIL-D-83531 and are capable of meeting the environmental requirements of MIL-STD-202 for moisture resistance, vibration shock, humidity and life. PHYSICAL DIMENSIONS inches (mm) .200 (5.08) MAX. .560 (14.22) MAX. .275 (6.99) MAX. DIA. .020 (0.51) TYP. .120 (3.05) MIN. .100 (2.54) .300 (7.62) .020 (0.51) DIA. 3EA. .045 (1.14) TYP. RHOMBUS P/N: SL2C-5-50 CUST P/N: DATE: 02/15/2000 Rhombus Industries Inc. Transformers & Magnetic Products NAME: SHEET: 1 OF 1 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971 www.rhombus-ind.com • email: [email protected]