Low Profile International Series Power Transformer Part Number VA T-61001 T-61002 T-61003 T-61004 T-61005 T-61006 T-61007 T-61008 T-61009 T-61010 T-61011 T-61012 T-61013 T-61014 T-61015 T-61016 T-61017 T-61018 T-61019 T-61020 T-61021 T-61022 T-61023 T-61024 T-61025 T-61026 T-61027 T-61028 T-61029 T-61030 T-61031 T-61032 T-61033 T-61034 T-61035 T-61036 T-61037 T-61038 T-61039 T-61040 T-61041 T-61042 2.5 5.0 10.0 20.0 30.0 56.0 2.5 5.0 10.0 20.0 30.0 56.0 2.5 5.0 10.0 20.0 30.0 56.0 2.5 5.0 10.0 20.0 12.0 56.0 2.5 5.0 10.0 20.0 30.0 56.0 2.5 5.0 10.0 20.0 30.0 56.0 2.5 5.0 10.0 20.0 30.0 56.0 Secondary Ratings --- Series --- --- Parallel --V I(Amps) V I (Amps) 10.0 10.0 10.0 10.0 10.0 10.0 12.6 12.6 12.6 12.6 12.6 12.6 16.0 16.0 16.0 16.0 16.0 16.0 20.0 20.0 20.0 20.0 20.0 20.0 24.0 24.0 24.0 24.0 24.0 24.0 28.0 28.0 28.0 28.0 28.0 28.0 36.0 36.0 36.0 36.0 36.0 36.0 0.25 0.5 1.0 2.0 3.0 5.6 0.2 0.4 0.8 1.6 2.4 4.4 0.15 0.31 0.62 1.25 1.9 3.5 0.12 0.25 0.5 1.0 1.5 2.8 0.1 0.21 0.42 0.83 1.25 2.33 0.09 0.18 0.36 0.72 1.06 2.0 0.07 0.14 0.28 0.56 0.82 1.56 5.0 5.0 5.0 5.0 5.0 5.0 6.3 6.3 6.3 6.3 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 14.0 14.0 14.0 18.0 18.0 18.0 18.0 18.0 18.0 NON-CONCENTRIC WINDING: Primary and Secondary are wound side-by-side rather than layered. The added isolation reduces interwinding capacitance, eliminating the need for an electro-static shield. Additionally, it reduces radiated magnetic fields. 0.5 1.0 2.0 4.0 6.0 11.2 0.4 0.8 1.6 3.2 4.8 8.8 0.3 0.62 1.25 2.5 3.8 7.0 0.24 0.5 1.0 2.0 3.0 5.6 0.2 0.42 0.84 1.66 2.5 4.66 0.18 0.36 0.72 1.44 2.12 4.0 0.14 0.28 0.56 1.12 1.64 3.12 Dual Primaries: 115/230V, 50/60 Hz 3 Flange Bobbin Design 6 VA Ratings -- Hi-Pot 4000 VRMS Parallel External Connections: 6-3, 1-4 & 10-7, 9-12 FOR 2.5 T0 56.0 VA L H W Series External Connections: 4-3 & 9-10 PRIMARY 1 4 3 B A 6 C A Schematic F 6 7 4 9 3 10 1 12 E FOR 2.5 T0 10.0 VA B A .187 MIN (4.75) 7 A 10 9 FOR 2.5 TO 10.0 SERIES 12 SECONDARY D 7 9 7 4 9 3 10 1 11 12 FOR 20.0 TO 56.0 SERIES FOR 20.0 T0 56.0 VA A 6 A A Materials used in construction of this component meet or exceed UL Class B and can be operated up to 130o C 10 11 12 SECONDARY 4 000 Volts RMS Hipot Test - Dual Non-concentric Bobbins and insulating Shroud Provide High Isolation and Reduced Capacitance Size (VA) 2.5 5.0 10.0 20.0 30.0 56.0 Dimension in Inches L W H A* 1.625 1.625 1.875 2.250 2.625 3.000 1.313 1.313 1.563 1.875 2.188 2.500 1.125 1.375 1.375 1.625 1.563 1.813 .200 .200 .200 .400 .550 .600 B C .250 .400 .400 .400 .275 .300 1.000 1.000 1.140 1.460 1.680 1.900 D .40 .55 .60 E F 1.063 1.063 1.250 1.500 1.75 2.19 2.00 2.50 * For 20.0 TO 56.0 series secondary only, dimensions A is 1/2 of value shown Specifications are subject to change without notice Rhombus Industries Inc. Transformers & Magnetic Products INTL-PC 11/98 www.rhombus-ind.com 15801 Chemical Lane Huntington Beach, California 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971