SURFACE MOUNT INFRARED LIGHT EMITTING DIODE QEB441 PACKAGE DIMENSIONS 0.118 (3.0) 0.102 (2.6) 0.083 (2.1) 0.067 (1.7) 0.091 (2.3) 0.083 (2.1) .041 (0.1) 0.035 (0.9) 0.028 (0.7) 0.134 (3.4) 0.118 (3.0) 0.094 (2.4) 0.043 (1.1) 0.020 (0.5) ANODE 0.024 (0.6) 0.016 (0.4) 0.007 (.18) 0.005 (.12) NOTES: 1. Dimensions are in inches (millimeters) 2. Tolerance of ± .010 (.25) on all non nominal dimensions unless otherwise specified. SCHEMATIC ANODE CATHODE DESCRIPTION The QEB441 is a 730 nm AlGaAs LED encapsulated in a PLCC-2 package. FEATURES • D= 730 nm • Chip Material: AlGaAs double heterojunction • Surface Mount PLCC-2 package • Wide Emission Angle, 120° • High Power • Tape and Reel option: .TR 2001 Fairchild Semiconductor Corporation DS300196 5/14/01 1 OF 4 www.fairchildsemi.com SURFACE MOUNT INFRARED LIGHT EMITTING DIODE QEB441 ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) Parameter Symbol Rating Unit Operating Temperature TOPR -55 to +100 °C Storage Temperature TSTG -55 to +100 °C Soldering Temperature TSOL 260 for 10 sec °C Continuous Forward Current IF 100 mA Peak Forward Current(4) IFP 1 A Reverse Voltage VR 5 V PD 180 mW Power (Flow)(2,3) Dissipation(1) NOTES 1. Derate power dissipation linearly TBD mW/°C above 25°C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Pulse conditions: tp = 100 µs, T = 10 ms. ELECTRICAL / OPTICAL CHARACTERISTICS PARAMETER (TA =25°C) TEST CONDITIONS SYMBOL IF = 10 mA, tp = 20 ms Forward Voltage IF = 100 mA, tp = 20 ms VF IF = 500 mA, tp = 1 ms IF = 1A, tp = 100 µs Emission Angle Reverse Leakage Current Peak Emission Wavelength Spectral Bandwidth www.fairchildsemi.com MAX. — — 2.0 — 2.1 — — 3.9 4.5 UNITS V — 5.5 — — 120 — % VR = 5 V IR — — 10 µA IF = 100 mA DP 710 730 750 nm IF = 100 mA D — 25 — nm 2 3 6 9 14 28 16 24 48 — — 100 IF = 100 mA IF = 500 mA, tp = 1 ms Ie IF = 1 A, tp = 100 µs Response Time TYP. 201/2 IF = 100 mA, tp = 20 ms Radiant Intensity MIN. IF = 10 mA, tp = 100 µs, T = 10 ms 2 OF 4 tr, tf 5/14/01 mW/sr ns DS300196 SURFACE MOUNT INFRARED LIGHT EMITTING DIODE QEB441 Fig.1 Relative Radiant Intensity vs. Input Current Fig.2 Forward Current vs. Forward Voltage IF - FORWARD CURRENT (mA) IE - NORMALIZED RADIANT INTENSITY 10 1 0.1 0.01 102 101 100 10-1 10-2 10-3 0.001 1 10 100 1 1000 2 3 4 5 6 VF - FORWARD VOLTAGE (V) IF - INPUT CURRENT (mA) Fig.4 Forward Voltage vs. Ambient Temperature VF - FORWARD VOLTAGE (V) 6 Fig.3 Radiation Diagram -20 -10 0 10 20 -30 30 -40 40 -50 50 -60 60 -70 70 -80 5 IF=500mA 4 3 IF=100mA 2 IF=50mA 0.8 0.6 0.4 0.2 0.0 0.2 0.4 0.6 0.8 IF=20mA IF Pulsed Pulse Width=100us Duty Cycle=0.1% 1 80 -90 1.0 IF=1000mA 0 90 1.0 -40 -20 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (˚C) Fig.5 Spectral Response 1.0 0.9 RELATIVE RESPONSE 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 660 680 700 720 740 760 780 800 WAVELENGTH (nm) DS300196 5/14/01 3 OF 4 www.fairchildsemi.com SURFACE MOUNT INFRARED LIGHT EMITTING DIODE QEB441 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 4 OF 4 5/14/01 DS300196