RMT Ltd Thermoelectric Module Datasheet Performance Parameters ΔTmax K Type Qmax W 1ML06-023-XXAN Imax A Umax V AC R Ohm H mm h mm 1ML06-023-xxAN (N=23) AlN 0.5mm ceramics version 1ML06-023-05AN 70 5.7 3.5 1ML06-023-07AN 71 4.0 2.4 1ML06-023-09AN 72 3.2 2.0 1ML06-023-12AN 72 2.4 1.5 2.9 0.68 1.7 0.5 0.90 1.9 0.7 1.20 2.1 0.9 1.60 2.4 1.2 Performance data are given at 300K, vacuum Technical Drawing Options available A. TEC Assembly: Solder Sn-Sb (Tmelt=230°C) B. Ceramics: 1.Pure Al2O3(100%) 2.Alumina (Al2O3 - 96%) 3.Aluminum Nitride (AlN) 100% AlN used as standard C. Ceramics Surface Options D. Thermistor (optional) 1. Blank ceramics Can be mounted to cold side 2. Metallized: ceramics edge. Calibration 2.1 Ni / Sn(Bi) is available. 2.2 Gold plating 3. Metallized and pre-tinned: E. Terminal wires 3.1 Solder 94 (Pb-Sn-Bi, Tmelt=94°C) 1. Pre-tinned Copper 3.2 Solder 117 (In-Sn, Tmelt=117°C) 2. Insulated Wires 3.3 Solder 138 (Sn-Bi, Tmelt=138°C) 3. Insulated Color Coded 3.4 Solder 183 (Pb-Sn, Tmelt=183°C) 53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 1 of 4 RMT Ltd Thermoelectric Module Datasheet Performance Plots Temperature difference, K Temperature difference, K 1ML06-023-05AN05 Heat Pumped at the Cold Side, W C.O.P Voltage, V Current, A Temperature difference, K Temperature difference, K Performance Plots Temperature difference, K Temperature difference, K 1ML06-023-07AN05 Heat Pumped at the Cold Side, W C.O.P Voltage, V Current, A Temperature difference, K Temperature difference, K Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax 53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 2 of 4 RMT Ltd Thermoelectric Module Datasheet Performance Plots Temperature difference, K Temperature difference, K 1ML06-023-09AN05 Heat Pumped at the Cold Side, W C.O.P Voltage, V Current, A Temperature difference, K Temperature difference, K Performance Plots Temperature difference, K Temperature difference, K 1ML06-023-12AN05 Heat Pumped at the Cold Side, W C.O.P Voltage, V Current, A Temperature difference, K Temperature difference, K Color Legend: Imax, 0.8 Imax, 0.6 Imax, 0.4 Imax 53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 3 of 4 RMT Ltd Thermoelectric Module Datasheet Application Tips 1. Never heat TE module more than 200˚C (TEC assembled at 230˚C). 2. Never use TE module without attached heat sink at hot (bottom) side. 3. Connect TE module to DC power supply according to polarity. 4. Do not apply DC current higher than Imax. Installation 1. Mechanical Mounting. TEC is placed between two heat exchangers . This construction is fixed by screws or in another mechanical way. It is suitable for large modules (with dimensions 30x30mm and larger). Miniature types require other assembling methods in most cases. 2. Soldering. This method is suitable for a TE module with metallized outside surfaces. RMT provides this option and also makes pre-tinning for TE modules. 3. Glueing. It is an up-to-date method that is used by many customers due to availability of glues with good thermoconductive properties. A glue is usually based on some epoxy compound filled with some thermoconductive material such as graphite or diamond powders, silver, SiN and others. The application of a specific type depends on application features and the type of a TE module. Object being cooled Object being cooled TEC TEC 1 3 2 Screw mounting Heatsink Soldering Heatsink Gluing 53 Leninskij prosp. Moscow 119991 Russia, ph: +7-499-132-6817, fax: +7-499-783-3664, web: www.rmtltd.ru Copyright 2008. RMT Ltd. The design and specifications of products can be changed by RMT Ltd without notice. Page 4 of 4