HB-2232 Reed Switch with High Breakdown Form A, Center Contact, Breakdown Voltage Configurable All dimensions in mm This reed switch is designed with highly flexible blades to get maximum contact gap at lower AT ranges, and consequently having high break down characteristics. The two types of contacts options available provide breakdown at 350V or 500V minimum. Higher ampere turn groups will have even higher breakdown voltage values. This reed switch is Lead (Pb) free and RoHS compliant. Formations Available Cropped SMD Welded Soldered Goal post L Formed Applications This reed switch is suitable for use in the following applications and many others: relays in food processors, power switches in explosive areas, magnetic extensometers... Electrical Sub code Operate Range Release Range Contact Rating (max) Switching Current (max) Carry Current (max) Switching Voltage (max) Switching Voltage (max) Breakdown Voltage Initial Contact Resistance (max) Insulation Resistance (min) Capacitance (min) Miscellaneous Operate Time (max) Bounce Time (max) Release Time (max) Resonance Frequency Operating Frequency Operating Temperature Test Coil Lead out plating Shock Resistance Vibration (10-2000Hz) AT AT W/ VA A A VDC VAC VDC m pF ms ms ms Hz Hz °C g g 1.0 0.5 0.2 >2000 500 -40 to +200 717 102 002 Sn (Pb free) 50 20 L 20 – 60 8 – 25 30.0 0.5 1.75 230 125 350 100 10 11 0.2 H 30 – 60 12 – 25 90.0 0.75 2.50 230 125 500 100 10 11 0.2 Ordering Code HB-2232-(Sub Code)-(Start Operate AT)(Finish Operate AT) Example HB-2232-H-30-35 Denotes 500 V breakdown voltage in 30-35 Operate AT band Other Configurations Available Dynamic contact resistance limit, Higher insulation resistance, Special release limits, Gold plates leads Please refer to our reed switch usage notes Due to continual improvement, specifications are subject to change without notice www.reed-sensor.com 10 May 2008 Reed Relays and Electronics India Limited [email protected] Tel 91-44-6528-4022