OMRON G8SE

Sub--Miniature Automotive PCB Relay
Sub--Miniature Automotive PCB Relay
General purpose automotive PCB relay.
High capacity relay.
High heat resistance.
Available Types
Type
G8SE--1A4--L 12DC (320!)
Contact form
SPST
Recommended loads
Motor, Resistive
Contact Data
Continuous carry current (max.)
20A
Inrush current (L/R=7ms; 15ms max.)
60A
Contact value drop (Initial value)
50m!
Ratings/Specifications
Rated voltage
12 VDC
Operating voltage (max.)
16 VDC
Coil resistance
320 !
Pull in voltage (cold start) at +20"C (max.)
7.3 VDC
Drop--out voltage at +20"C (min.)
1.2 VDC
Max. Continuous carry current flow time
(16 VDC at 80"C max.)
Unlimited
Operating time (max.)
10 ms
Release time (max.)
5 ms
Operating ambient temperature
--40"C to +110"C
Mechanical life (min.)
1,000,000 cycles (at frequency of 18,000 operations/hour)
Electrical life (resistive load) (max.)
100,000 cycles
Weight
16.0g
G8SE
G8SE
G8SE
Application Examples
#
#
#
#
#
#
#
#
#
#
#
Electric wing mirror
Car audio
Power radio aerial
Air--conditioning
Courtesy lamp
Electric sunroof
Intermittent windshield wiper
Passive restraint seatbelt
Power door lock
Power seat
Power window
Dimensions
(All dimensions in mm)
TYPE
4 x 1.3 dia.
mounting holes
COIL RESISTANCE
RATED VOLTAGE
1.8
2 x 1.4 dia.
mounting holes
MANUFACTURED
COUNTRY
6
MARK
12
mark
LOT NO.
1.8
22.5 max.
21.6 typ.
16.5 max.
15.6 typ.
1.45
4.85
16.5 max.
16.2 typ.
5.3
2
3
5
4
1
1.0
mark
3.5
4.5
10
3.0 min.
1.0
1.0
6
1.2
0.32
0.4
2.5
Omron PCB relays may be mounted in any
convenient location that is dry and not exposed to
excessive dust, S02, H2S or organic gases.
All Omron PCB relays may be oriented in any
desired direction. Whenever possible, however,
care should be taken that they are not subjected
to vibration along the direction of contact
movement.
If several relays are to be mounted on a single
printed circuit board, they should be given at least
3mm clearance on all sides as shown in the
diagram below.
3mm min.
3mm min.
Note:
Cat. No. K905--E2--01
Proper spacing is necessary to dissipate heat build--up
from individual relays. Other than this, there are normally
no restrictions depending on application. Please contact
Omron for details.
In the interest of product improvement, specifications are subject to change without notice.
OMRON Electronics Ltd.
LEADERS IN ELECTRONIC COMPONENTS
1, Apsley Way,
Staples Corner,
London NW2 7HF
Phone: (0181) 450 4646 Fax: (0181) 450 8087