FEATURES APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Distributed Power Architectures Semiconductor Equipment Microprocessor Power Applications T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS • OUTPUT CURRENT UP TO 30A • SMALL SIZE AND LOW PROFILE : 1.30” X 0.53” X 0.35”(SMD) ; 2.00” X 0.50” X 0.35” (SIP) • HIGH EFFICIENCY UP TO 93%@5VIN, 3.3Vo, FULL LOAD • DOS(H)30-05T : 4.5VDC TO 5.5VDC INPUT; 0.8VDC TO 3.63VDC OUTPUT DOS30-12T : 6.0VDC TO 14.0VDC INPUT; 0.8VDC TO 3.63VDC OUTPUT DOH30-12T : 6.0VDC TO 14.0VDC INPUT; 0.8VDC TO 5.5VDC OUTPUT OUTPUT VOLTAGE PROGRAMMABLE VIA EXTERNAL RESISTOR • FIXED SWITCHING FREQUENCY (300KHZ) • MONOTONIC START-UP INTO PRE-BIASED OUTPUT • OUTPUT VOLTAGE SEQUENCING • PARALLEL OPERATION WITH ACTIVE CURRENT SHARING • DESIGN MEETS UL60950-1, EN60950-1 AND IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC 1 / OPTIONS Positive Logic Remote on/off, Current Share, Extra GND Pin, Long Pins DESCRIPTION DOS30 (SMD type), DOH30 (SIP type) are non-isolated DC/DC converters that can deliver up to 30A of output current with full load efficiency of 93% at 5.0V input and 3.3V output. All specifications are typical at nominal input, 3.3Vo, full load and 25ºC otherwise noted INPUT SPECIFICATIONS DOS30-05T DOH30-05T DOS30-12T 30A max. DOS30-05T Vin(nom) =5V 4.5 – 5.5VDC 30A max. DOH30-05T Vin,min=Vo(set)+1.5V 0.8≦Vo≦2.75V 30A max. Input voltage range Output current DOS30-12T Vin(nom) =12V 6.0 – 14.0VDC 2.75<Vo≦3.63V 20A max. DOH30-12T Vin,min=Vo(set)+2.4V DOH30-12T 0.8≦Vo≦2.75V 30A max. 2.75<Vo≦5.5V 25A max. Maximum input current Vin(min.) to Vin(max.); Io=Io(max.) 27A Voltage accuracy Full load and Vin(nom.) ± 1.5%Vo(set) C filter Minimum load 0% Input filter (Note 5) Start-up voltage Input under-voltage 4.4V,typ Vin=Vin(min.) to Vin(max.) Line regulation ± 0.1%Vo(set),typ. lockout 4.3V,typ Shutdown voltage at Full Load Load regulation No Load to Full Load ± 0.4%Vo(set),typ. Input reflected ripple 5~20MHz, 1uH source impedance 100mAp-p Ripple and noise (Note 2) 20MHz bandwidth 75mVp-p current (Note 6) Temperature coefficient ±0.5%, typ. ENVIRONMENTAL SPECIFICATIONS ΔIo /Δt = 5A/uS ,Vin(nom.) Peak deviation 350mV,typ. Dynamic load Operating ambient temperature –40ºC ~ +85ºC(with derating) Load change step Setting time response (50% to 100% or (Vo<10%peak 25uS,typ. Storage temperature range –55ºC ~ +125ºC (Note 2) 100% to 50% of Io(max)) deviation) Thermal shock MIL-STD-810F ΔIo /Δt = 5A/uS ,Vin(nom.) Peak deviation 250mV,typ. Dynamic load Load change step Setting time Over temperature protection 125ºC,typ. response (50% to 100% or (Vo<10%peak 40uS,typ. (Note 3) FEATURE SPECIFICATIONS 100% to 50% of Io(max.)) deviation) Output current limit 150%,typ. Sequencing delay time (Note 7) 10msec,min. Output short-circuit current Hiccup, Automatics recovery Tracking accuracy ∣V SEQ－Vo∣ ESR≧1mΩ 2000uF,max. External load capacitance Power-up (2V/ms) Vin(min.) to Vin(max.); Io(min.) 100mV,typ. ESR≧10mΩ 10000uF,max. 200mV,typ. Power-down (1V/ms) to Io(max.); VSEQ < Vo. Vin=Vin(min.) to 3%Vo(set), max. Active load share (option) Output voltage overshoot-startup Accuracy 10% Io Vin(max.); F.L. Number of units in parallel 5,max. (Note 8) DOS30-05T 0.8V ~ 3.63V Remote ON/OFF (Note 9) Voltage adjustability (see fig.1) DOH30-05T 0.8V ~ 3.63V Negative logic(standard) ON = -0.3V < Vr < 1.2V IIN=200μA,max. 0.8V ~ 3.63V (Note 4) DOS30-12T OFF = 3.0V < Vr < Vin(max.) IIN=3.3mA,max. 0.8V ~ 5.5V DOH30-12T Positive logic(option) ON = 3.0V < Vr < Vin(max.) IIN=200μA,max. GENERAL SPECIFICATIONS OFF= -0.3V < Vr < 1.2V IIN=3.3mA,max. See table Remote sense range None Rise time Time for Vo to rise from 10% to 90%of Vo(set) 300KHz, typ. Case 1 (Note 10) IEC60950-1, UL60950-1, EN60950-1 Turn-on delay time Case 2 (Note 11) 1.30 X 0.53 X 0.35 Inch SMD (33.0 X 13.5 X 8.8 mm) 2.00 X 0.50 X 0.35 Inch SIP (50.8 X 12.7 X 8.8 mm) 6.0g(0.21oz) SMD 7.0g(0.25oz) SIP 6 BELLCORE TR-NWT-000332 3.145 x 10 hrs 5 MIL-HDBK-217F 3.626 x 10 hrs Efficiency Isolation voltage Switching frequency Design meet safety standard Dimensions Weight MTBF (Note 1) 0.5V,max. 10ms,max. 2.5ms,typ. 2.5ms,typ. 3 2 Model Name Package DOS30-05T SMD DOH30-05T SIP DOS30-12T SMD DOH30-12T SIP Input Voltage Output Voltage 4.5 ~ 5.5Vdc Vin,min=Vo(set)+1.5V 6.0 ~ 14.0Vdc Vin,min=Vo(set)+2.4V Output Current Efficiency (%) Min. Load Max. Load Vin(nom.), 3.3Vdc, Full Load 0.8 ~ 3.63Vdc 0A 30A 93% 0.8 ~ 3.63Vdc 0A 30A 93% 0.8 ≦ Vo ≦ 2.75Vdc 2.75 < Vo ≦ 3.63Vdc 0.8 ≦ Vo ≦ 2.75Vdc 2.75 < Vo ≦ 5.5Vdc 30A 20A 30A 25A 0A 0A 90% 90% Note 1. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. External with Cout = 1uF ceramic//10uF tantalum capacitors. 3. External with Cout = 2×150uF polymer capacitors. 4. Output voltage programmable from 0.8V to 5.0V by connecting a single resistor (shown as Rtrim in Table 1) between the TRIM and GND pins of the module. To calculate the value of the resistor Rtrim for a particular output voltage Vo, use the following equation: 1200 -100 Ω Rtrim = Vo – 0.80 5. To make sure the module is stable, input external capacitors is necessary that minimize input ripple voltage of the module. 6. To minimize input reflected ripple. External π filter is recommended at the input of the module. The filter is shown as figure2. 7. Delay from Vin,min to application of voltage on SEQ pin. 8. Selecting current share function that the regulations may not meet listed specification. 9. The On/Off signal is referenced to ground. The standard remote On/Off logic of the device is negative logic. Adding a device code suffix “-P” is option for positive logic of remote On/Off. 10. Case 1 :On/Off input is set to logic low (module on) and then input power is applied (delay from instant at which Vin=Vin(min) until Vo=10% of Vo(set)) 11. Case 2 :Input power is applied for at least one second and then the On/Off input is set to logic low (delay form instant at which Von/off=0.3V until Vo=10% of Vo(set)) [ ] CAUTION: This power module is not internally fused. An input line fuse must always be used. Table 1. Trim Table Vo(set) (V) Rtrim (Ω) 0.8 Open 1.2 2900 1.5 1614 1.8 1100 2.5 605 3.3 380 5.0 185 Figure 1. Table 2. TO OSCILLOSCOPE CURRENT PROBE Device Options Option Suffix Remote On/Off Positive Logic -P Current Share -S Extra GND pin 2 extra GND pins only for SMD TYPE Long Pins Figure 2. 5.08mm±0.25mm only for SIP TYPE -E -L / 3 3 DOS30-05T, Vo=3.3V Derating Curve SIP TYPE VOUT VOUT +SENSE GND VOUT GND (option) SHARE VIN GND VIN SEQ TRIM ON/OFF BOTTOM VIEW SIDE VIEW SMD TYPE SEQ GND VOUT TRIM SENSE SHARE (option) GND (option) GND (option) ON/OFF VIN PIN SIZE: ψ1.60mm SURFACE MOUNT CONTACT BOTTOM VIEW SIDE VIEW 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) Last update:2008/6/4 / 3