RSG PPS-125

RSG
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de
■
■
ELECTRONIC COMPONENTS
■
■
■
■
Änderungen vorbehalten / subject to change without notice
PPS-125
125W Single Output with PFC Function
series
Features :
Universal AC input / Full range
Built-in active PFC function
Protections:Short circuit/Over load/Over voltage
PWM control and regulated
3
High power density 6.117W/inch
Built-in remote sense function
LED indicator for power on
100% full load burn-in test
125W with 18CFM FAN
5"x3" compact size
3 years warranty
SPECIFICATION
MODEL
OUTPUT
PPS-125-3.3
PPS-125-5
PPS-125-12
PPS-125-13.5 PPS-125-15
PPS-125-24
PPS-125-27
DC VOLTAGE
3.3V
5V
12V
13.5V
15V
24V
27V
48V
RATED CURRENT
20A
20A
8.5A
7.5A
6.7A
4.2A
3.8A
2.1A
CURRENT RANGE (convection) 0 ~ 20A
0 ~ 20A
0 ~ 8.5A
0 ~ 7.5A
0 ~ 6.7A
0 ~ 4.2A
0 ~ 3.8A
0 ~ 2.1A
CURRENT RANGE (18CFM FAN) 0 ~ 25A
0 ~ 25A
0 ~ 10.5A
0 ~ 9.3A
0 ~ 8.4A
0 ~ 5.2A
0 ~ 4.6A
0 ~ 2.6A
RATED POWER (convection) 66W
100W
102W
101.25W
100.5W
100.8W
102.6W
100.8W
RATED POWER (18CFM FAN) 82.5W
125W
126W
125.55W
126W
124.8W
124.2W
124.8W
RIPPLE & NOISE (max.) Note.2 100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
150mVp-p
150mVp-p
250mVp-p
VOLTAGE ADJ. RANGE
4.75 ~ 5.25V
2.0%
11.40 ~ 12.60V 12.82 ~ 14.17V 14.25 ~ 15.75V 22.80 ~ 25.20V 25.65 ~ 28.35V 45.60 ~ 50.40V
2.0%
2.0%
2.0%
1.0%
1.0%
1.0%
3.13 ~ 3.46V
VOLTAGE TOLERANCE Note.3 2.0%
INPUT
PPS-125-48
LINE REGULATION
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
LOAD REGULATION
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
SETUP, RISE TIME
1000ms, 30ms/230VAC
HOLD TIME (Typ.)
24ms/230VAC
VOLTAGE RANGE
90 ~ 264VAC
FREQUENCY RANGE
47~63Hz
POWER FACTOR (Typ.)
PF>0.93/230VAC
EFFICIENCY (Typ.)
70%
79%
1.2A
1.7A
AC CURRENT
(Typ.)
115VAC
230VAC
INRUSH CURRENT (Typ.)
2000ms, 30ms/115VAC at full load
24ms/115VAC at full load
127 ~ 370VDC
PF>0.98/115VAC at full load
80%
80%
80%
83%
<2mA / 240VAC
OVER LOAD
130 ~ 160% rated output power
Protection type : Fold back current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
84%
0.75A
0.6A
COLD START 24A/230VAC
LEAKAGE CURRENT
PROTECTION
83%
3.63 ~ 4.45V
5.5 ~ 6.75V
13.8 ~ 16.2V
15.5 ~ 20.25V 17.25 ~ 20.25V 27.6 ~ 32.4V
31.05 ~ 36.45V 57.6 ~ 67.2V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
-20 ~ +70 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-40 ~ +85
, 10 ~ 95% RH
SAFETY STANDARDS
0.05%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 Approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
SAFETY & ISOLATION RESISTANCE
EMC
(Note 4)
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
MTBF
OTHERS
NOTE
DIMENSION
PACKING
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
111.7Khrs min. MIL-HDBK-217F (25 )
127*76.2*34.6mm (L*W*H)
0.37Kg; 36pcs/14.3Kg/0.91CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. HS1,HS2 & HS3 can not be shorted.
File Name:PPS-125-SPEC 2006-07-24
PPS-125
125W Single Output with PFC Function
Mechanical Specification
series
Unit:mm
127
115.6
6.4
5
FS1
T2A 250VAC
64.8
76.2
SVR1
LED1
1 CN3
2
1
2
3
4
5
6
7
8
1
2
3
CN1
CN4
43.
34.6
5
Air flow
direction
AC Input Connector (CN1) : JST B3P-VH or equivalent
Pin No.
1
2
3
Assignment
AC/L
No Pin
AC/N
Mating Housing
DC Output Connector (CN4) : JST B8P-VH or equivalent
Terminal
JST VHR
or equivalent
Pin No.
1~4
5~8
JST SVH-21T-P1.1
or equivalent
Pin No.
1
2
Derating Curve
Terminal
JST VHR
or equivalent
JST SVH-21T-P1.1
or equivalent
Assignment
RS+
RS-
Mating Housing
Terminal
Molex 5051
or equivalent
Molex 4809
or equivalent
Output Derating VS Input Voltage
100
125
Forced air 18CFM
90
100
Free air Convection
80
70
70
50
60
LOAD(%)
LOAD (%)
Mating Housing
Remote Sense(CN3) : Molex 5045-02 or equivalent
HS1,HS2 & HS3 can not be shorted
20
-20
Assignment
-V
+V
0
10
20 25 30
40
50
60
50
40
70 (HORIZONTAL)
90
100
115
135
155
264
INPUT VOLTAGE (V) 60Hz
AMBIENT TEMPERATURE ( )
File Name:PPS-125-SPEC 2006-07-24
RSG
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de
■
■
ELECTRONIC COMPONENTS
■
Änderungen vorbehalten / subject to change without notice
■
■
■