RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ELECTRONIC COMPONENTS ■ ■ ■ ■ Änderungen vorbehalten / subject to change without notice PPQ-100 100W Quad Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 70KHz(Optional) 3 years warranty SPECIFICATION MODEL OUTPUT PPQ-100B CH2 CH3 CH4 CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 DC VOLTAGE 5V 12V -12V -5V 5V 15V -15V -5V 5V 24V 12V -12V RATED CURRENT 10A 3.4A 0.6A 0.6A 10A 2.6A 0.6A 0.6A 8A 2A 0.6A 0.6A CURRENT RANGE 2 ~ 15A 0.3 ~ 4A 0 ~ 1A 0 ~ 1A 2 ~ 15A 0.3 ~ 4A 0 ~ 1A 0 ~ 1A 2 ~ 10A 0.3 ~ 4A 0 ~ 1A 0 ~ 1A RATED POWER (max.) 101W 5.0% 5.0% 3.0% +10,-6% 5.0% 5.0% 3.0% 8.0% 5.0% 5.0% 2.0% 2.0% 1.0% 1.0% 2.0% 2.0% 1.0% 1.0% 2.0% 2.0% 1.0% LOAD REGULATION 2.0% 6.0% 2.0% 2.0% 2.0% 6.0% 2.0% 2.0% 2.0% 6.0% 2.0% 2.0% SETUP, RISE TIME 800ms, 50ms/230VAC HOLD TIME (Typ.) 24ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY(Typ.) 75% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.65A/115VAC OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE 1200ms, 50ms/115VAC at full load 24ms/115VAC at full load 127 ~370VDC PF>0.98/115VAC at full load 76% 78% 0.85A/230VAC COLD START 30A <3.5mA /240VAC 105% ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF DIMENSION PACKING NOTE CH1:4.75 ~ 5.5V 3.0% 8.0% 1.0% PROTECTION OTHERS 102.4W LINE REGULATION OVER LOAD (Note 4) 101W RIPPLE & NOISE (max.) Note.2 100mVp-p 150mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 100mVp-p 100mVp-p 100mVp-p 200mVp-p 100mVp-p 100mVp-p VOLTAGE ADJ. RANGE LEAKAGE CURRENT EMC PPQ-100D CH1 VOLTAGE TOLERANCE Note.3 INPUT PPQ-100C OUTPUT NUMBER Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 162.5K hrs min. MIL-HDBK-217F (25 ) 177.8*107.95*38mm (L*W*H) 0.62Kg; 24pcs/15.9Kg/1.34CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:PPQ-100-SPEC 2006-02-14 PPQ-100 100W Quad Output with PFC Function Mechanical Specification series Unit:mm 177.8 165.1 6.35 6.35 95.25 107.95 CN3 1 2 3 4 5 6 7 8 1 2 3 4 5 CN2 FS1 T5A/250V CN1 LED FG 1 2 3 4 5 SVR1 38 4- 3.96 DC Output Connector (CN2) : JST B5P-VH or equivalent AC Input Connector (CN1) : JST B5P-VH or equivalent Assignment FG No Pin AC/L AC/N Pin No. 1 2,4 3 5 Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent Pin No. 1,2 3 4 5 Assignment V2 NC V3 V4 Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent DC Output Connector (CN3) : JST B8P-VH or equivalent Pin No. 1~4 5~8 Derating Curve 17.8CFM Forced Air Cooling(10cm) Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent 100 90 90 80 80 70 LOAD (%) 60 LOAD (%) Mating Housing Output Derating VS Input Voltage 100 40 20 -10 -10 Assignment V1 COM 0 0 10 20 30 40 50 60 50 40 60 (HORIZONTAL) 90 100 115 135 155 230 264 INPUT VOLTAGE (V) 60Hz AMBIENT TEMPERATURE ( ) File Name:PPQ-100-SPEC 2006-02-14 RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ELECTRONIC COMPONENTS ■ Änderungen vorbehalten / subject to change without notice ■ ■ ■