RSG SP-150

RSG
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de
■
■
ELECTRONIC COMPONENTS
■
■
■
■
Änderungen vorbehalten / subject to change without notice
SP-150
150W Single Output with PFC Function
series
Features :
Universal AC input / full range
Built-in active PFC function, PF>0.93
Protections:Short circuit/Over load/Over voltage/Over temperature
Built-in constant current limiting circuit
Remote ON-OFF control(Optional)
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at PFC:67KHz PWM:134KHz
3 years warranty
R
SPECIFICATION
MODEL
SP-150-3.3
SP-150-5
SP-150-7.5
SP-150-12
SP-150-13.5 SP-150-15
SP-150-24
SP-150-27
SP-150-48
DC VOLTAGE
3.3V
5V
7.5V
12V
13.5V
15V
24V
27V
48V
RATED CURRENT
30A
30A
20A
12.5A
11.2A
10A
6.3A
5.6A
3.2A
CURRENT RANGE
0 ~ 30A
0 ~ 30A
0 ~ 20A
0 ~ 12.5A
0 ~ 11.2A
0 ~ 10A
0 ~ 6.3A
0 ~ 5.6A
0 ~ 3.2A
RATED POWER
99W
150W
150W
150W
151.2W
150W
150W
151.2W
153.6W
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
150mVp-p
150mVp-p
250mVp-p
RIPPLE & NOISE (max.) Note.2 100mVp-p
OUTPUT
3.14 ~ 3.63V 4.75 ~ 5.5V
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.3
2.0%
2.0%
2.0%
2.0%
2.0%
2.0%
1.0%
1.0%
1.0%
LINE REGULATION
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
LOAD REGULATION
1.0%
1.0%
1.0%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
600ms, 30ms at full load
SETUP, RISE TIME
20ms at full load
HOLD TIME (Typ.)
VOLTAGE RANGE
INPUT
7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V
Note.5 85 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
120 ~ 370VDC
POWER FACTOR (Typ.)
PF>0.93/230VAC
EFFICIENCY (Typ.)
67%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
2.5A/115VAC
1.2A/230VAC
COLD START 40A/230VAC
LEAKAGE CURRENT
<2mA / 240VAC
OVER LOAD
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.2V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V
PROTECTION OVER VOLTAGE
PF>0.98/115VAC at full load
75%
79%
80%
80%
81%
83%
84%
84%
Protection type : Shut down o/p voltage, re-power on to recover
95
5 (TSW1 : Detect on heatsink of power transistor)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
REMOTE CONTROL(OPTION) CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF
-10 ~ +60 (Refer to output load derating curve)
WORKING TEMP.
20 ~ 90% RH non-condensing
WORKING HUMIDITY
OVER TEMPERATURE
FUNCTION
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-20 ~ +85
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY & ISOLATION RESISTANCE
UL60950-1, TUV EN60950-1 and S-MARK J60950 Approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
EMC
(Note 4)
NOTE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
MTBF
OTHERS
, 10 ~ 95% RH
0.05%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
DIMENSION
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
191.2K hrs min. MIL-HDBK-217F (25 )
199*99*50mm (L*W*H)
PACKING
0.76Kg; 20pcs/16.4Kg/1.28CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:SP-150-SPEC 2005-09-13
SP-150
150W Single Output with PFC Function
Mechanical Specification
Case No. 916A
series
Unit:mm
199
20
35
133
25
117
70
65
CN1
1
2
R.C.
+V ADJ.
2-M4 L=5mm
99
5
79
9.5
6
119
51
LED
7
4
49.5
3
8
2
38
5-M3 L=3mm
16
10
1
15
142
12.5
25
50
25
25
4-M4 L=6mm
Remote ON/OFF(CN1):JST S2B-XH or equivalent(optional)
Terminal pin number assignment :
Pin No.
1
2
3
Assignment
AC/L
AC/N
FG
Pin No.
4,5
6,7
Assignment
DC OUTPUT -V
DC OUTPUT +V
Derating Curve
Pin No.
1
2
Assignment
RC+
RC-
Mating Housing
Terminal
JST XHP
or equivalent
JST SXH-001T-P0.6
or equivalent
Output Derating VS Input Voltage
Ta=25
SP-150-12~48
SP-150-3.3~7.5
(With 18CFM FAN)
100
100
90
80
80
70
SP-150-3.3
SP-150-5
SP-150-7.5
40
LOAD (%)
LOAD (%)
60
20
-10
-10
0
0
10
10
20
20
30
35
40
45
AMBIENT TEMPERATURE (
45
50
60
50
40
50 (HORIZONTAL)
55 (VERTICAL)
85
100
115
135
155
230
264
INPUT VOLTAGE (VAC) 60Hz
)
File Name:SP-150-SPEC 2005-09-13
RSG
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de
■
■
ELECTRONIC COMPONENTS
■
Änderungen vorbehalten / subject to change without notice
■
■
■