RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ■ ■ ELECTRONIC COMPONENTS ■ ■ PPS-200 Änderungen vorbehalten / subject to change without notice 200W Single Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function High efficiency up to 90% (typ) Protections:Short circuit/Over load/Over voltage/Over temperature PWM control and regulated 3 High power density 9.78W/inch 5"x3" compact size Built-in remote sense function ZVS technology to reduce power dissipation Free air convection for 150W and 200W with 20.5 CFM forced air 3 years warranty SPECIFICATION MODEL OUTPUT PPS-200-5 PPS-200-15 PPS-200-24 PPS-200-27 PPS-200-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V RATED CURRENT 36A 16.6A 13.3A 8.3A 7.4A 4.167A CURRENT RANGE (convection) 0 ~ 26A 0 ~ 12.5A 0 ~ 10A 0 ~ 6.25A 0 ~ 5.56A 0 ~ 3.13A CURRENT RANGE (20.5CFM FAN) 0 ~ 36A 0 ~ 16.6A 0 ~ 13.3A 0 ~ 8.3A 0 ~ 7.4A 0 ~ 4.167A RATED POWER (convection) 130W 150W 150W 150W 150W 150W RATED POWER (20.5CFM FAN) 180W 199.2W 199.5W 199.2W 199.8W 200W RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p VOLTAGE ADJ. RANGE 10.8 ~ 13.2V 3.0% 13.5 ~ 16.5V 3.0% 21.6 ~ 26.4V 2.0% 24.3 ~ 30V 2.0% 43.2 ~ 52.8V 2.0% VOLTAGE TOLERANCE Note.3 INPUT PPS-200-12 4.5 ~ 5.5V 4.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 1200ms, 60ms/230VAC HOLD TIME (Typ.) 12ms/230VAC/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.94/230VAC EFFICIENCY (Typ.) 86% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2.2A/115VAC 1.2A/230VAC COLD START 70A/230VAC LEAKAGE CURRENT <2mA / 240VAC OVER LOAD 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 2500ms, 60ms/115VAC at full load 127 ~ 370VDC PF>0.98/115VAC at full load 89% 89% 13.8 ~ 16.2V 5.6 ~ 7.25V 17.25 ~ 20.25V 89% 27.6 ~ 32.4V 89% 90% 31.05 ~ 36.45V 57.6 ~ 67.2V Protection type : Hiccup mode, recovers automatically after fault condition is removed 110 (TSW1)Detect on heatsink of power transistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.05%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 4) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF OTHERS NOTE DIMENSION PACKING Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 108.4Khrs min. MIL-HDBK-217F (25 ) 127*76.2*34.6mm (L*W*H) 0.37Kg; 36pcs/14.3Kg/0.91CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. HS1,HS2 & HS3 can not be shorted. File Name:PPS-200-SPEC 2006-07-24 PPS-200 200W Single Output with PFC Function Mechanical Specification series Unit:mm 127 5 115.6 6.4 12 CN3 SVR1 76.2 64.8 1 2 3 4 5 6 7 8 1 2 3 CN1 AC Input Connector (CN1) : JST B3P-VH or equivalent Pin No. 1 2 3 CN5 Assignment AC/L No Pin AC/N Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent LED1 DC Output Connector (CN5) : JST B8P-VH or equivalent 4- Pin No. 1~4 5~8 Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent 5 20.5CFM Mating Housing 3. 50mm direction Air flow Assignment +V -V Remote Sense(CN3) : Molex 5045-02 or equivalent Pin No. 1 2 FAN Assignment RSRS+ Mating Housing Terminal Molex 5051 or equivalent Molex 4809 or equivalent 34.6 HS1,HS2 & HS3 can not be shorted Block Diagram fosc : 100KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V DETECTION CIRCUIT FG O.L.P. PWM & PFC CONTROL Derating Curve O.V.P. Output Derating VS Input Voltage Ta = 25 100 125 90 With FAN 100 80 70 50 LOAD(%) LOAD (%) 70 Without FAN 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 90 115 125 135 155 264 INPUT VOLTAGE (V) 60Hz File Name:PPS-200-SPEC 2006-07-24