RSH Fuseholder Blocks & Clips www.schurter.com/pg02b Fuseholder Open Design, 6.3 x 32 mm, Solder 250 VAC · 3.2 W / 10 A16 A (UL) Description References Standards Weblinks -Screw or rivet fastening General Product Information -IEC 60127-6 -UL 512 -CSA C22.2 no. 39 Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Approvals -UL File Number: E39328 Technical Data Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC Soldering Methods Solderability 6.3 x 32 mm Screw Screw or Rivet Solder 250 VAC 16 A (UL) 3.2 W / 10 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 00 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoset, black, UL 94V-0 Material: Terminals Nickel-Silver Unit Weight (Socket/Cap) 7.27 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Voltage, Current, Approvals Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Abmessungen Wave 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2 350 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2 < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 59.5 mm 1.5 4.8 8 6.4 0.5 4.8 3.7 41 ø 6.3 59.5 16 ø 3.2 3.7 41 59.5 ø3 6.4 14.5 1.9 145 1.9 14 Variant 0031.6001 3.8 18.5 Variant 0031.6010 Fuses RSH Fuseholder Blocks & Clips www.schurter.com/pg02b Derating Curves for Fuseholders Admissible Power Acceptance in Watt 3.2 2.5 I = 1.0 In 2.0 I = 0.7 In 1.5 I = << In 1.0 0.5 0.0 0 20 40 60 80 100 Ambient Air Temperature Ta °C Variants Holder Strip 0031.6001 l l Packaging Unit Order Number 0031.6010 Bulk (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.