FAS Fuseholders www.schurter.com/pg02 Shock-Safe Fuseholder, 5 x 20 mm, Fingergrip, horizontal, PC1 Fingergrip 250 VAC · 1.6 W / 6.3 A Description References Standards Weblinks Technical Data Shocksafe Category Fuse-Link Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC Soldering Methods Solderability -Shocksafe Category PC1 General Product Information -IEC 60127-6 Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) PC1 5 x 20 mm PCB Solder THT 250 VAC 6.3 A 1.6 W / 6.3 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 40 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, UL 94V-0 Material: Cap Thermoset, UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 4.7 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Voltage, Current, Approvals Abmessungen Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Wave 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 1A < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 31 mm 12 ±0.2 31 8 4 12.5 ±0.1 5 5.25 1.2 0 10 -0.2 ø 9.5 5.2 +0.1 0 1.3 6 12.5 +0.2 0 Drilling diagram Fuses FAS Fuseholders www.schurter.com/pg02 Derating Curves for Fuseholders Admissible power acceptance in Watt 1.6 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = << In 0.4 0.2 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C Variants Holder l Cap Terminal Degree of Protection Order Number Slot Knob Straight IP 40 0031.3501 Packaging Unit Bulk (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.