DD11 Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Line Switch 2-pole, Fuseholder 1- or 2-pole Standard or Medical Fuse drawer C14 70° C Description -Panel Mount: Screw-on version from front or rear side -3 Functions: Appliance Inlet Protection class I, Line Switch 2-pole, Fuseholder for fuse-links 5 x 20 mm 1‑ or 2‑pole -Quick connect terminals 4.8 x 0.8 mm -Alternative: version with line filter DD12 -Alternative: version for snap-in mounting KM -Alternative: version for PCB mounting DD21 Approvals -VDE License Number: 40018283 -UL License Number: E93617 Characteristics -Ultra-compact design. Ideal for low profile designs -All single elements are already wired -Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuseholder is accessible from the equipment front For added safety "Extra-Safe" fuse drawers are available -Ideal for application with high transient loads Designed for standard and medical applications -Qualified for use in equipment according IEC/EN 60950 Other versions on request -Solder terminals -Fuse drawer 1-pole, plus spare fuse case -Fuse drawer 2-pole, with shorting bar -Other rocker marking -Line switch 1-pole -Protection class II, 70°C References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 8 A / 250 VAC; 60 Hz ¹⁾ > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 85 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw-on mounting: max 8 mm Mounting screw torque max 0.5 Nm Rear side mounting: max 2 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Switch C14 acc. to IEC/EN 60320-1 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated or illuminated, acc. to IEC 61058-1 Technical details 1) with cover 7 A, without cover 8 A Connectors DD11 Power entry modules without line filter www.schurter.com/pg05 Dimensions Screw version 65 mm 46.7 10.3 PE N L 6 90° 30.5 27.7 27.1 5 3.2 2 56 30 65 33.1 2.5 10.6 29.8 6 5 a) 46.6 56 ±0.15 31.6 47.1 ±0.10 4 3. R 28.1 ±0.10 2a 2 22.9 1 ±0 4 .0 5 31.5 b) a) view with cover b) view without cover Diagrams non illuminated illuminated 1) Line 2) Load 1) Line 2) Load Derating Curves 1-pole 2-pole 1.5 I = 1.0 In I = 0.7 In 1.0 I = << In 0.5 0.0 0 20 40 60 80 1.6 Admissible power acceptance in Watt per pole Admissible power acceptance in Watt 2.0 100 Ambient air temperature Ta °C 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = < < In 0.4 0.2 0.0 0 20 Ambient air temperature Ta °C Variants Fuse drawer must be ordered separately (see accessories). Fingergrip and Extra Safe. The same drawer as used by type KEA. Color Cover 1) Fuseholder Line Switch Illumination 1-pole 2-pole non-illuminated - DD11.0111.1110 1-pole 2-pole illuminated red DD11.0113.1110 1-pole 2-pole illuminated green DD11.0114.1110 2-pole 2-pole non-illuminated - DD11.0121.1110 2-pole 2-pole illuminated red DD11.0123.1110 2-pole 2-pole illuminated green 1-pole 2-pole non-illuminated - l DD11.0111.1111 1-pole 2-pole illuminated red l DD11.0113.1111 1-pole 2-pole illuminated green l DD11.0114.1111 Connectors Order Number DD11.0124.1110 40 60 80 100 DD11 Power entry modules without line filter www.schurter.com/pg05 1) 2-pole 2-pole non-illuminated - l DD11.0121.1111 2-pole 2-pole illuminated red l DD11.0123.1111 2-pole 2-pole illuminated green l DD11.0124.1111 current rating UL: with cover 7 A, without cover 8 A Packaging unit 40 Pcs Required Accessory Description Fusedrawer 2 Fusedrawer with and without Voltage Selector Insert Fingergrip, 2-pole 4301.1401 Extra-Safe, 2-pole 4301.1403 Fingergrip, 1-pole 4301.1405 Extra-Safe, 1-pole 4301.1407 ... Accessories Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to DD11 Connector Overview complete IEC Connector C15, Rewireable, Straight 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 IEC Connector C13, Rewireable, Angled 4012 Connector further types to DD11 ... Power Cord Overview complete Power Cord with IEC Connector C13, Angled 0311 Power Cord with IEC Connector C13, Angled 3011 Power Cord with IEC Connector C13, Angled 3012 Power Cord with IEC Connector C13, Angled 3013 Power Cord with IEC Connector C13 3020 Power Cord further types to DD11 ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.