ESD05R VOLTAGE: 5.0V Elektronische Bauelemente 150 W Transient Voltage Suppressors Diode RoHS Compliant Product DESCRIPTION . Designed to protect voltage sensitive components from ESD. . Excellent clamping capability, low leakage and fast response. . Cellular phones, MP3 players, digital cameras ... etc. . Suitable for electronics where board space is a major design consideration. SOD-523 FEATURES . Response time is typically < 1 ns . Low leakage . Stand-off voltage:5.0V . ESD rating of class 3 (> 16 kV) per human body model . IEC61000-4-2 level 4 ESD protection 1.2±0.05 1.6±0.1 CATHODE MARK 0.3±0.05 0.1±0.05 0.8±0.05 0.6±0.1 MARKING CODE Dimensions in millimeters ZF K A MAXIMUM RATINGS Rating 25 C ambient temperature unless otherwise specified. o TYPE NUMBER Air IEC61000-4-2 (ESD) Contact per human body model ESD Voltage per machine model Lead Solder Temperature - Max. (10 sec duration) Thermal Resistance Junction-to-ambient Junction and Storage Temperature Range Total Power Dissipation on FR-5 board (Note 1) SYMBOL VESD TL RθJA TJ , TSTG PD LIMITS +/- 30 +/- 30 16 400 260 625 -55 ~ +150 200 UNITS kV kV V C C/W C mW o o o Stresses exceeding "Maximum Ratings" may damage the device. "Maximum Ratings" are stress ratings only. Functional operation above the recommended. Operating conditions is not implied. Extended exposure to stresses above the recommended operating conditions may affect device reliability. 1. FR-5 = 1.0 x 0.75 x 0.62 in. http://www.SeCoSGmbH.com/ 24-Aug-2007 Rev. A Any changing of specification will not be informed individual Page 1 of 2 ESD05R VOLTAGE: 5.0V Elektronische Bauelemente 150 W Transient Voltage Suppressors Diode ELECTRICAL CHARACTERISTICS (T = 25 oC unless otherwise noted, VF = 0.9V Max. @ IF=10mA for all types) TYPE NUMBER Reverse Stand-Off Voltage Reverse Leakage Current Clamping Voltage Peak Pulse Current Clamping Voltage Reverse Breakdown Voltage Test Current Junction Capacitance Peak Power Dissipation SYMBOL VRWM IR VC IPP Min. - Typ. - Max. 5.0 0.08 11.6 9.4 UNIT V µA V A VC - - 18.6 V VBR IT C PPK 6.2 - 1.0 80 - 174 V mA pF W TEST CONDITIONS VRWM = 5.0 V IPP = 5 A (surge charge waveform per Figure 2.) IPP = 9.4 A (surge charge waveform per Figure 2.) o IT = 1mA, TAMBIENT = 25 C (surge charge waveform per Figure 2.) ELECTRICAL CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 24-Aug-2007 Rev. A Any changing of specification will not be informed individual Page 2 of 2