KS33K5 Voltage: 3.3 V 40 W Transient Voltage Suppressor Diode Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free DESCRIPTION SOT-363 Designed to protect voltage sensitive components from ESD Excellent clamping capability, low leakage and fast response Cellular phones, MP3 players, digital cameras ... etc. Suitable for electronics where board space is a major design consideration A E L B F H D G J K C FEATURES Response time is typically < 1 ns Low leakage Stand-off voltage: 3.3 V ESD rating of class 3 (> 15 kV) per human body model IEC61000-4-2 level 4 ESD protection REF. A B C D E F Millimeter Min. Max. 2.00 2.20 2.15 2.45 1.15 1.35 0.90 1.10 1.20 1.40 0.15 0.35 REF. G H J K L Millimeter Min. Max. 0.100 REF. 0.525 REF. 0.08 0.15 8° 0.650 TYP. MARKING CODE 33K5 ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) Symbol VESD PD TL RθJA TJ, TSTG Parameter Value air discharge contact discharge Total Power Dissipation on FR-5 board (Note 2) Lead Solder Temperature - Max. (10 sec duration) Thermal Resistance Junction-to-ambient Junction and Storage Temperature Range 15 8 150 260 833 -55 ~ +150 ESD Voltage IEC61000-4-2 (ESD) Units KV mW °C °C / W °C Stresses exceeding "Maximum Ratings" may damage the device. "Maximum Ratings" are stress ratings only. Functional operation above the recommended. Operating conditions is not implied. Extended exposure to stresses above the recommended operating conditions may affect device reliability. 1. FR-5 = 1.0 x 0.75 x 0.62 in. 2. Only 1 diode under power. For all 5 diodes under power, PD will be 20%. Mounted on FR-4 board with min pad. ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise specified) Type Number Reverse Stand-Off Voltage Reverse Leakage Current Peak Pulse Current Clamping Voltage Clamping Voltage Reverse Breakdown Voltage Test Current Junction Capacitance Symbol VRWM IR IPP VC VC Min. - Typ. 80 - Max. 3.3 250 3.5 9.0 12.0 Unit V nA A V V Test Conditions VBR 5.35 5.7 5.85 V IT = 1 mA, TAMB = 25 °C IT C - 1.0 30 40 mA pF F = 1MHz, TAMB = 25°C PPK - - 40 W VRWM = 3.3 V IPP = 1 A IPP = 3.5 A (@8x20 μS,@ TA<&= 25°C; Peak Power Dissipation Non-repetitive current per Figure 1. Derate per Figure 2) http://www.SeCoSGmbH.com/ 24-Aug-2008 Rev. B Any changes of specification will not be informed individually. Page 1 of 2 KS33K5 Voltage: 3.3 V 40 W Transient Voltage Suppressor Diode Elektronische Bauelemente RATINGS AND CHARACTERISTICS CURVES Pulse Waveform Clamping Voltage vs. Peak Pulse Current 110 80 70 e 60 Clamping Voltage- Vc(V) 90 Percent of Ipp 15 Waveform Parameters tr = 8μs td = 20μs 100 -t 50 40 td = IPP /2 30 Waveform Parameters tr = 8μs td = 20μs 10 5 20 10 0 0 0 5 10 15 20 25 Time (μS) 0 1 2 3 4 5 6 30 Peak Pulse Current-Ipp(A) APPLICATION NOTE The KS33K5 is designed for the uni-direction of up to five lines of bi-direction protection of four lines from the damage caused by Electronic Discharge (ESD) and surge pulses. The KS33K5 may be used on line where the signal polarities are above or below ground.KS33K5 can with stand and provides protection from a surge of 40 watts peak pulse power per line for a 8/20 μs waveform High speed data line Typical application for uni-directional protection of five lines. http://www.SeCoSGmbH.com/ 24-Aug-2008 Rev. B High speed data line Typical application for bi-directional protection of four lines. Any changes of specification will not be informed individually. Page 2 of 2