GBJ25005 ~ GBJ2510 VOLTAGE 50V ~ 1000V 25.0 AMP Glass Passivated Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen-free. ƔFEATURES . Rating to 1000V PRV . Ideal for printed circuit board . Low forward voltage drop, high current capability . Reliable low cost construction utilizing molded plastic technique results in inexpensive product . The plastic material has UL flammability classification 94V-0 . Mounting position: Any Dimensions in inches and (millimeters) ƔMAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 к ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load, For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward(with heatsink Note2) Rectified Current @ TC=100к(without heatsink) SYMBOL VRRM VRMS VDC GBJ25005 GBJ2501 GBJ2502 GBJ2504 GBJ2506 GBJ2508 GBJ2510 50 35 50 100 70 100 200 140 200 400 280 400 25.0 4.2 600 420 600 800 560 800 1000 700 1000 I(AV) Peak Forward Surge Current 8.3 ms IFSM single half sine-wave super imposed on rated load (JEDEC method) Maximum Forward Voltage at 12.5A VF Maximum DC Reverse Current Ta=25 к IR at Rated DC Blocking Voltage Ta=125 к 2 2 I t Rating for fusing (t<8.3ms) It Typical Junction Capacitance CJ per element (Note1) Typical Thermal Resistance (Note 2) RșJC Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Device mounted on 300mm x 300mm x 1.6mm Cu Plate Heatsink. http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A UNITS V V V A 340 A 1.1 10 500 510 µA AS 85 pF 0.6 - 55 ~ + 150 - 55 ~ + 150 к/W к к V 2 Any changing of specification will not be informed individual Page 1 of 2 GBJ25005 ~ GBJ2510 Elektronische Bauelemente VOLTAGE 50V ~ 1000V 25.0 AMP Glass Passivated Bridge Rectifiers ƔRATING AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2