DB101S ~ DB107S VOLTAGE 50 V ~ 1000 V 1.0 Amp Surface Mount Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free DB-1S FEATURES Low forward voltage drop, high current capability Rating to 1000V PRV Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique results in inexpensive products Lead tin Pb / Sn copper The plastic material has UL flammability classification 94V-0 MECHANICAL DATA Polarity: As marked on Body Weight:0.02 ounces, 0.38 grams Mounting position: Any Millimeter Min. Max. 8.10 8.80 9.80 10.3 6.20 6.50 0.95 1.20 REF. A B C D REF. E F G H Millimeter Min. Max. 3.05 3.40 5.00 5.20 7.60 8.50 0.20 0.35 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) PARAMETERS SYMBOL DB DB DB DB DB DB DB 101S 102S 103S 104S 105S 106S 107S UNIT Peak Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Working Peak Reverse Voltage VRMS 35 70 140 280 420 560 700 DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Average Forward Rectified Current @TA=40℃ Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 1A DC Maximum DC Reverse Current at Rated DC Blocking Voltage TJ=25℃ TJ=125℃ I2t Rating for Fusing (t<8.3ms) Typical Junction Capacitance Per Element (Note1) Typical Thermal Resistance (Note2) Operating and Storage temperature range Note: V I(AV) 1 A IFSM 50 A VF 1.1 V IR 10 500 uA I2t 10.4 A2s CJ 25 pF RθJA 40 ℃/W TJ, TSTG -55 ~ 150 ℃ 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC 2. Thermal resistance from junction to ambient mounted on P.C.B. with 0.5*0.5"(13*13mm) copper pads. http://www.SeCoSGmbH.com/ 17-Nov-2014 Rev. E Any changes of specification will not be informed individually. Page 1 of 2 DB101S ~ DB107S Elektronische Bauelemente VOLTAGE 50 V ~ 1000 V 1.0 Amp Surface Mount Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 17-Nov-2014 Rev. E Any changes of specification will not be informed individually. Page 2 of 2