KBP1005G ~ KBP110G VOLTAGE 50V ~ 1000V Elektronische Bauelemente 1.5 AMP Bridge Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen-free. 0.600 (15.24) 0.118 x 45 (3.0) o 0.560 (14.22) 0.460 (11.68) FEATURES 0.500 (12.70) 0.460 (11.68) 0.420 (10.67) . Surge overload rating – 40 amperes peak . Ideal for printed circuit board . Plastic material has underwrites laboratory 0. 6 0 (15.24) MIN. Flammability classification 94V-0 . Mounting position: Any 0.50 (12.7) Min. 0.060 (1.52) MAX. 0.034 (0.86) 0.028 (0.76) 0.160 (4.1) 0.140 (3.6) 0.053 (1.35) 0.045 (1.14) 0.200 (5.08) 0.180 (4.57) Dimensions in inches and ( millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz, For capacitive load, derate current by 20%. o TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward o Rectified Output Current @ TA=50 C Peak Forward Surge Current, 8.3 ms single half Sine-wave superimposed on rated load Maximum Forward Voltage Drop Per Bridge Element at 1.0A Peak Maximum Reverse Current at Rated DC Blocking Voltage per Element Maximum Reverse Current at Rated o DC Blocking Voltage per Element @ TC=100 C Operating and Storage Temperature Range http://www.SeCoSGmbH.com/ 01-Jun-2006 Rev. B SYMBOL VRRM VRMS VDC KBP1005G KBP101G KBP102G 50 35 50 100 70 100 200 140 200 KBP104G 400 280 400 KBP106G 600 420 600 KBP108G 800 560 800 KBP110G 1000 700 1000 Unit V V V I(AV) 1.5 A IFSM 40 A VF 1.1 V 10 uA 1.0 mA IR TJ, TSTG - 55 ~ + 150 o C Any changing of specification will not be informed individual Page 1 of 2 KBP1005G ~ KBP110G VOLTAGE 50V ~ 1000V Elektronische Bauelemente 1.5 AMP Bridge Rectifiers ƔRATING AND CHARACTERISTIC CURVES FIG.2-TYPICAL FORWARD CHARACTERISTICS 1.50 20.0 10.0 1.00 INSTANTANEOUS FORWARD CURRENT AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1-DERATING CURVE OUTPUT RECTIFIED CURRENT 1.0 0.50 SINGLE PHASE HALF WAVE 60Hz 0.00 50 150 100 o T J=25 C 0.1 AMBIENT TEMPERATURE, RESISTIVE OR INDUCTIVE LOAD 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE. VOLTS FIG.3-TYPICAL REVERSE CHARACTERISTICS FIG.4-MAXIMUM FORWARD SURGE CURRENT 60 1.0 o T J=25 C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE http://www.SeCoSGmbH.com/ 01-Jun-2006 Rev. B PEAK FORWARD SURGE CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 30 50 20 40 o T J=25 C 10 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz Any changing of specification will not be informed individual Page 2 of 2