SCS4448WS Elektronische Bauelemente Surface Mount Fast Switching Diode RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free SOD-323 (SC-76) FEATURES 2.5±0.2 . Fast switching speed . Ultra-Small surface mount package . For general purpose switching applications . High conductance . Also available in lead free version 1.7±0.1 CATHODE MARK 0.2A0.1 0.3±0.05 1.25±0.1 0.95 MECHANICAL DATA +0.2 - 0.15 Marking: T5 . Case: SOD-323, Plastic . Epoxy: UL 94V-0 rate flame retardant . Metallurgically bonded construction . Polarity: Color band denotes cathode end . Mounting position: Any . Weight: 0.004 grams MAXIMUM RATINGS Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. O TYPE NUMBER Non-Repetitive Peak Reverse Voltage Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Forward Continuous Current Average Rectified Output Current Non-Repetitive Peak Forward Surge Current SYMBOL VRM VRRM VRWM VR VR(RMS) IFM IO @ t = 1.0!µs @ t = 1.0!s Power Dissipation (Note 1) Thermal Resistance Junction to Ambient Air (Note 1) Operating and Storage Temperature Range http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A IFSM PD RșJA TJ, TSTG VALUE 100 UNITS V 75 V 53 500 250 4.0 2.0 200 625 - 65 ~ + 150 V mA mA A mW к/W к Any changing of specification will not be informed individual Page 1 of 2 SCS4448WS Elektronische Bauelemente Surface Mount Fast Switching Diode ƔELECTRICAL CHARACTERISTICS (Ta=25к) TYPE NUMBER Reverse Breakdown Voltage SYMBOL VRM Min. 75 Max. 0.720 0.855 1.0 1.25 UNITS V Forward Voltage (Note 2) VFM - Peak Reverse Current (Note 2) IRM - 2.5 µA VR = 75V, TJ = 25ʚ 25 nA VR = 25V, TJ = 25ʚ Total Capacitance CT - 4.0 pF - 4.0 ns VR = 0, f = 1.0MHz IF = IR = 10mA, Irr = 0.1x IR, RL = 100ȍ Reverse Recovery Time trr V Test Condition IR = 1.0µA IF = 5.0mA IF = 10mA IF = 100mA IF = 150mA NOTES: 1. Part mounted on FR-4 PC board with recommended pad layout, 2. Short duration test pulse used to minimize self-heating effect. ƔRATING AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2