SD103AW THRU SD103CW VOLTAGE 20V ~ 40V Elektronische Bauelemente 0.35AMP Surface Mount Schottky Barrier Rectifiers RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free SOD-123 FEATURES A B . Low forward voltage drop . Guard ring construction for C E transient protection . Negligible reverse recovery time . Low reverse capacitance H D G DIM A B C D E G H J MECHANICAL DATA . Case: SOD-123, Molded plastic . Epoxy: UL 94V-0 rate flame retardant . Metallurgically bonded construction . Polarity: Color band denotes cathode end . Mounting position: Any MILLMETERS MIN MAX 3.55 3.85 2.55 2.85 1.40 1.80 -----1.35 0.30 0.78 0.15 ---------0.25 ----0.15 J INCHES MIN MAX 0.140 0.152 0.100 0.112 0.550 0.071 -----0.053 0.120 0.031 0.006 ------------0.001 ------0.006 Device Marking: SD103AW:S4 SD103BW:S5 SD103CW:S6 MAXIMUM RATINGS ｡ Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER SYMBOL Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage VRWM Maximum DC Blocking Voltage VR RMS Reverse Voltage VR(RMS) Forward Continuous Current (Note1) I FM Non-Repetitive Peak Forward Surge Current IFSM @ t ≤ 1.0s Power Dissipation (Note 1) Pd Thermal Resistance, Junction to Ambient Air (Note1) RθJA Operating Temperature Range Tj Storage Temperature Range TSTG http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A SD103AW 40 40 40 28 SD103BW 30 30 30 21 350 SD103CW 20 20 20 14 UNIT V mA 1.5 A 200 625 -65 ~ +125 -65 ~ +125 mW ℃ /W ℃ ℃ Any changing of specification will not be informed individual Page 1 of 2 SD103AW THRU SD103CW VOLTAGE 20V ~ 40V Elektronische Bauelemente 0.35AMP Surface Mount Schottky Barrier Rectifiers ●ELECTRICAL CHARACTERISTICS TYPE NUMBER Reverse Forward Voltage (Note2) SYMBOL SD103AW SD103BW SD103CW Forward Voltage Drop Peak Reverse Current V(BR)R VFM SD103AW SD103BW SD103CW IRM Junction Capacitance Cj Reverse Recovery Time trr TEST CONDITION IR=10µA IF=20mA IF=200mA V R=30V V R=20V VR=10V VR=0V, f=1.0MHz IF=IR=200mA, Irr=0.1xIR, RL=100Ω Min. 40 30 20 Typ. Max. UNIT - - V - - 0.37 0.60 V - - 5.0 µA - 50 - pF - 10 - ns Note: 1. Valid provided that leads are kept at ambient temperature. 2. Test period < 3000 s. ●RATING AND CHARACTERISTIC CURVES (SD103AW THRU SD103CW) 100 100 Cj, CAPACITANCE (pF) IF, FORWARD CURRENT (mA) 1000 10 1.0 10 1.0 0.10 0.01 0 0.5 VF, FORWARD VOLTAGE (V) Fig. 1 Typical Forward Characteristics http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A 1.0 0.1 0 10 20 30 40 VR, REVERSE VOLTAGE (V) Fig. 2 Typ. Junction Capacitance vs Reverse Voltage Any changing of specification will not be informed individual Page 2 of 2