RGP10A THRU RGP10M FAST RECOVERY PLASTIC RECTIFIERS SINTERED GLASS JUNCTION Reverse Voltage – 50 to 1000 Volts Forward Current – 1.0 Amperes Features • High temperature metallurgically bonded construction Sintered glass cavity free junction. • Capability of meeting environmental standard of MIL-S-19500. • High temperature soldering guaranteed 350oC/10sec/0.375” lead length at 5 lbs tension Operate at TA = 55oC with no thermal run away Typical ir<0.1μA. Mechanical Data • • • Terminals: Plated axial leads, solderable per MIL-STD 202E, method 208C Polarity: Color band denotes cathode Mounting Position: Any Maximum Ratings and Electrical Characteristics Ratings at 25oCambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. Symbols RGP RGP RGP RGP RGP RGP RGP 10A 10B 10D 10G 10J 10K 10M Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current O 3/8” lead length at TA = 55 C I(AV) 1.0 A Peak forward surge current 8.3mS single half sine-wave superimposed on rated load IFSM 30 A VF 1.3 V IR(AV) 100 μA IR 5.0 200 μA Maximum forward voltage at rated forward current o and 25 C Maximum full load reverse current, full cycle O average at 55 C Ambient Maximum DC reverse current at rated DC blocking voltage O 150 C TA = 25 OC TA = Maximum reverse recovery time (Note 1) Trr Typical junction capacitance (Note 2) CJ Typical thermal resistance (Note 3) Operating junction and storage temperature range 150 μA 250 500 nS 15 RθJA 55 TJ ,TSTG -65 to +175 pF O C/W O Notes: 1.Reverse recovery condition IF = 0.5A, IR = 1.0A, Irr = 0.25A. 2.Measured at 1.0MHZ and applied reverse voltage of 4.0 VDC. 3 Thermal resistance from junction to ambient at 3/8” lead length, P.C. board mounted. SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 14/05/2003 C RGP10A THRU RGP10M Maximum non-repetitive peak forward surge current Forward current derating curve 30 Forward surge current , A Average forward rectified current, A 1.0 0.75 0.5 0.25 20 10 8.3mm Single half sine wave (JEDEC method) 0.375"(9.5mm)lead length rsistive or inductive load 0 50 0 150 100 100 10 1 175 Number of cycles at 50Hz Ambient Temperature ( C ) Typical reverse characteristics Typical instantaneous forward 20 Instantaneous reverse current, microamperes characteristics Instantaneous forward current, A 10 1 TJ=25 C Pulse width =300 s 1% Duty Cycle 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 10 TJ=125 C 1 TJ=75 C 0.1 TJ=25 C 0.01 0 1.6 Instantaneous forward voltage, V 20 40 100 80 60 Percent of rated peak reverse voltage, % Typical junction capacitance Typical transient thermal impedance Transient thermal impedance, Junction capacitance,pF c/w 100 10 f=1MHz Tj=25 oC 1 1 10 Reverse voltage, V 100 10 1 0.1 0.01 100 0.1 1 10 100 Pulse duration, sec SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 14/05/2003